Recommended Trailer Hitch for a 2023 Acura RDX

Question

Question:

Will this hitch fit a 2023 Acura RDX

asked by: Maria

0

Expert Reply:

Yes, the etrailer Trailer Hitch Receiver # e72AR will fit your 2023 Acura RDX. This hitch has a maximum GTW of 3,500 lbs, a maximum tongue weight capacity of 350 lbs, and is American made.

expert reply by: Bryce D

0

Answer 1

For your 2019 Acura RDX the hitch that sticks out the least is the etrailer Class III part #e72AR. Other options stick out around an inch more or so.

view full answer...

Answer 2

While we do not have any images of the etrailer Trailer Hitch Receiver #e72AR installed on a 2019 Acura RDX you can see the similar Draw-Tite Receiver #76268 on the images I have included. One of the images is with it installed on a RDX that had the…

view full answer...

Answer 3

I recommend installing The etrailer Hitch #e72AR on your 2021 Acura RDX. We tried to install the #76902 on a 2020 Acura RDX and there was no holes for it to mount up to and not enough room between the spare tire and the rear fascia to fit it. The…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 8

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 9

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 10

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 11

Yes, the Curt hitch part #C77ZV is a fit for the 2023 Toyota Crown Hybrid. I attached a link to the install instructions as well as a link to an installer finder in case you wanted to find someone near you to install the hitch.

view full answer...

Answer 12

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Recommended Trailer Hitch for a 2023 Acura RDX

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching