Is the Curt A25 5th Wheel Hitch for GM Puck Systems Compatible w/ a Curt Rotaflex Pin Box?

Question

Question:

Is the Curt A25 5th wheel compatible with the Curt Rotaflex?

asked by: Mike M

1

Helpful Expert Reply:

Yes, it is! The Curt A25 5th Wheel Trailer Hitch item # C24FR works great with a Curt Rotaflex pin box. This hitch has a 25,000 lbs capacity. The base will attach directly to the pucks of the GM factory puck system in your 2023 GMC Sierra 3500.

expert reply by: Jerred H

1

Answer 1

This is a great question. The B&W OEM Companion #BWRVK3715 and the Curt A25 #C24FR for the factory pucks on your 2020 GMC Sierra 3500 (congrats on the new truck, by the way!) represent the very peak of fixed 5th wheel hitches on the market.…

view full answer...

Answer 2

Yes, the puck system used on the 2016-2019 Chevy/GMC trucks is different than the pucks used on the 2020 and newer trucks. So you would need a 5th wheel like the B&W Companion #BWRVK3710 for your 2020 GMC Sierra 3500 with an 8' Bed.…

view full answer...

Answer 3

A sliding 5th wheel hitch is going to be needed for your 2021 Chevy Silverado 2500 with a 6 foot 9 inch bed as this will ensure you have the proper clearance to turn so that your trailer doesn't smash into your truck bed. Having said that,…

view full answer...

Answer 4

You do not have to use a sliding 5th wheel hitch in a short bed truck. In many cases, truck beds shorter than 8 ft do not have enough clearance between the trailer and truck to execute sharp turns. This is why sliding hitches were invented. Due to…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion…

view full answer...

Answer 6

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two…

view full answer...

Answer 8

Beds shorter than 8 foot do commonly need a slider hitch David, but a lot of modern fifth wheel trailers are now made with tapered noses to help and in a lot of cases a slider isn't required. So if the trailer you plan to tow has a tapered…

view full answer...

Answer 9

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the…

view full answer...

Answer 10

The Ram OEM 5th wheel puck system, shown in the linked photo and article, was launched in 2013 so what you have in your truck is likely to be an aftermarket installation of some kind. These newer Ram trucks with the factory prep can directly accept…

view full answer...

Answer 11

To get the B&W Patriot #BWRVK3200 to work with your 2006 Dodge Ram you're going to need a set of 5th wheel rails #DM8552016-71. These rails are custom fit to your vehicle so they'll just bolt right up to the frame. It is worth…

view full answer...

Answer 12

As far as height adjustability and weight capacities the Curt Q20 #C16130 and the Curt A20 #C16140 are identical. They both have a Gross Towing Weight of 20,000 lbs, a Vertical Load Limit of 5,000 lbs, and a height range of 13-17 inches. When it…

view full answer...

Is the Curt A25 5th Wheel Hitch for GM Puck Systems Compatible w/ a Curt Rotaflex Pin Box?

Product Page this Question was Asked From

Continue Researching