Does etrailer Hitch # e28AR Fit 2023 Kia Sorento Plug In Hybrid

Question

Question:

Does item #e28AR fit a 2023 Kia Sorento Plug-In Hybrid? The listing doesnt specifically say PHEV so I want to confirm before buying. Thank you!

asked by: Lauren K

0

Expert Reply:

Yes it does. I'm happy to confirm for you that the etrailer Trailer Hitch Receiver # e28AR does indeed fit your 2023 Kia Sorento PHEV (plug-in hybrid).

expert reply by: Jameson C

0

Answer 1

Since you want a gloss hitch for your 2024 Kia Sorento Trent the best hitch solution is the Curt part #C34ER as this hitch fits your vehicle, would work great with a bike rack, and has a gloss black finish like you said you wanted.

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

I spoke with my contact at Thule regarding the Locking Ratchet Arm Assembly #753-3579 referenced in your question. He stated that it does not appear that the replacement part has had any recent upgrades, but it will also depend on which particular…

view full answer...

Answer 4

Yes, the etrailer Trailer Hitch Receiver #e28AR will fit on your 2023 Hyundai Santa Fe Hybrid. I have linked an installation video we did on a 2021 Santa Fe Hybrid below so you can see the installation process. The Vehicle Wiring Harness #CU94FR will…

view full answer...

Answer 5

I went out to the warehouse and measured the etrailer Trailer Hitch Receiver part #e28AR which is a fit for a 2022 Hyundai Santa Fe for you. The crosstube thickness/width is 1-3/8".

view full answer...

Answer 6

The trailer that I recommend for a 2023 Hyundai Santa Fe is the etrailer Trailer Hitch Receiver part #e28AR. This hitch features a bolt-on fit without any drilling required. It has a 2" receiver opening which will be great for towing or hitch…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

If your 2020 Kia Sorento has the factory tow package, there will be a tail light wiring connector behind the rear tire of the driver side, on the outside of the frame rail. As shown in the attached photos, an underbody cover will need to be removed…

view full answer...

Answer 10

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 11

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 12

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Does etrailer Hitch # e28AR Fit 2023 Kia Sorento Plug In Hybrid

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching