Does a Trunk Mounted Bike Rack Require Removal Before Opening Rear Hatch on 2024 Kia Niro PHEV?

Question

Question:

on a 2024 Kia Niro phev can I open the back hatch with the rack installed.

asked by: David A

0

Expert Reply:

It is not recommended to open the rear hatch on your 2024 Kia Niro PHEV with a trunk mounted bike rack like the Yakima FullBack 2 Bike Rack # Y02634 installed. You will want to remove the bikes and rack before opening the rear hatch to prevent any damage to the door hatch which could be caused by the clips holding the rack or the additional weight on the hatch door.

If you plan on carry any alternative or women's frame style bikes you will need the Yakima Tube Top Bike Adapter Bar # Y02531 to hang the bike on the above rack.

expert reply by: Bud M

0

Answer 1

Only a small part of the underneath bumper panel on your 2024 Kia Niro is needed to install either the Curt hitch that fits, which is the following part number: - Curt Trailer Hitch Receiver #C77NR I added a portion of the instructions which shows…

view full answer...

Answer 2

In order to install the Curt #C77NR on your 2023 Kia Niro hybrid, you'll need to trim a small portion of the underbody panel, not the fascia. The trimmed portion won't be very visible from the rear, it'll be more so from…

view full answer...

Answer 3

While the Curt #C13409 and Draw-Tite #76271 both have a 525lb tongue weight, 3,500 maximum gross trailer weighting and 5/8" pin hole with similar safety chain openings and ground clearance, there are some differences. The Draw Tite #76271 is…

view full answer...

Answer 4

The best trailer hitch we have for your 2019 Subaru Forester is the Draw-Tite Max-Frame Trailer Hitch Receiver part #76271. The reason that this is the best trailer hitch for you is because it is a custom fit which means no cutting or drilling is…

view full answer...

Answer 5

The Curt hitch part #C13409 is the hitch you'll want for bike rack clearance for your 2020 Subaru Forester as it sticks out the furthest relative to the rear bumper. The hitch pin is recessed only 4 inches compared to other options that are right…

view full answer...

Answer 6

Yes, the Curt Trailer Hitch Receiver #C77NR is a confirmed fit for the 2024 Kia Niro.

view full answer...

Answer 7

The Kuat #KU74FR Transfer V2 that you'd looked at, which is compatible with both 1-1/4 and 2 inch hitches has a 40 lb per bike capacity, so it wouldn't safely carry your e-bikes. However the #KU84FR V2 model which fits 2 inch hitches only,…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 10

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 11

If your vehicle has a factory brake controller plug, you can simply use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers – Ford, Item #3034-P, which will connect to the vehicle plug and the brake controller. On the new E-450…

view full answer...

Answer 12

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...