Correct Replacement Vaccuum Breaker for Dometic 310 Series Toilets W/ Without A Hand Sprayer

Question

Question:

Hello, do you sell replacement vacuum breaker covers and for Dometic 310series RV toilets? I know you sell the whole seat but I am solely in need of the vacuum breaker cover so hoping to find just that somewhere.

asked by: Bailee

0

Expert Reply:

We do not sell just the cover, but we do have the entire kit as a replacement. If your Dometic 310 series toilet does not have a hand sprayer, then you'd want # DOM95FR, however if it does have a hand sprayer then you'd want # DOM86FR.

expert reply by: Bryce D

0

Answer 1

It really depends on what is referring to when you say the spring is bad. If you are meaning the leaf spring on the trailer is worn out and is now flat, you can have issues with the trailer bouncing due to the spring no longer being a spring, and…

view full answer...

Answer 2

Your current Dexter springs 072-097-00 are a 25-1/4 inch leaf spring that is rated for 5,200 lbs. So we have a couple options that would match the length but not the exact capacity. You'd want the part #e28SR for a 5k rated spring in this…

view full answer...

Answer 3

To correctly measure a leaf spring, you'll want to jack the trailer up on jack stands so the axle is hanging freely, then measure directly across from the center of one spring eye to the other, as shown in the provided diagram. The height of…

view full answer...

Answer 4

Yes, going from a 4 leaf to a 6 leaf spring would add slightly to your ride height. For example, if the current 4 leaf spring has 3/8" thick leaves, and you go to a 6 leaf spring with 3/8" thick leaves, you would be adding…

view full answer...

Answer 5

It does sound like you have found some clear damage to your 5th wheel trailer's leaf springs that will require attention. Uneven tire wear can be caused by a number of things - incorrect pressure, inadequate weight on the axle or a visibly…

view full answer...

Answer 6

Hey Patrick, so for your leaf spring upgrade I am going to need to know a couple of things before I can get you over to the right part. Specifically, the length from eye to eye, the spring width, leaf thickness, and the number of leaves. From here…

view full answer...

Answer 7

Since Grand Design is kind enough to list certain parts for their trailers I can confirm you have a 33" wheelbase on your 2020 Grand Design Transcend 27BHS. This means the MORryde Rubber Equalizers #MR87ZR will fit your trailer. Although…

view full answer...

Answer 8

Thanks for the picture of your build sheet! It does look like the etrailer 6-Leaf Double-Eye Spring item #e94SR you purchased is the correct replacement spring. Feel free to email me back a picture of your suspension but unless you are flipping…

view full answer...

Answer 9

We can tell you how to determine the correct replacement 6,000 lb leaf springs for your 5th wheel trailer, though don't have a way of knowing specifically what is on any one trailer. It's pretty simple though, as all you have to do is…

view full answer...

Answer 10

I definitely recommend replacing your 3,500 lb 26 inch leaf springs with the 26 inch 4-Leaf Double-Eye Spring for 4,000-lb Trailer Axles #e22YR. The 4,500 lb would be too stiff and your ride would suffer so the better option by far are the 4k…

view full answer...

Answer 11

The hangers you currently have on your trailer are ones I have run into before. That being said, I spoke with MORryde and the #MR27ZR will still fit your trailer, but there is a modification that will need to be made. You’ll have to trim according…

view full answer...

Answer 12

Hey Roy, The only U-bolt kit we currently only offer for 1-1/2" square axles is part #CE23102, which only has a 3-3/8" length so it likely wouldn't be the best option for you. Instead you'll want to order the 1-1/2" Square…

view full answer...

Correct Replacement Vaccuum Breaker for Dometic 310 Series Toilets W/ Without A Hand Sprayer

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching