Will The Curt T-Connector Vehicle Wiring Harness # C45FV Fit a 2023 Mazda CX-5?

Question

Question:

the official curt website says this wiring 56487 does not fit on the 2023 mazda cx-5. i just want to make sure it fits before buying it.

asked by: Justin

0

Expert Reply:

Yes, the Curt T-Connector Vehicle Wiring Harness # C45FV will fit your 2023 Mazda CX-5. I have linked an installation video below showing the installation on your vehicle.

expert reply by: Bud M

0

Answer 1

To install a 7-Way harness on your 2023 Mazda CX-50 you will need two separate wiring harnesses because they don't make just one that'll do the job. The first harness you'll need is the Curt T-Connector Vehicle Wiring Harness item #C45FV.…

view full answer...

Answer 2

Unfortunately the Curt wiring harness #C45FV would not activate the tow mode on your 2023 Mazda CX-50. According to Mazda, only their OEM wiring harness will work with the tow mode. You can absolutely still use the #C45FV to work your trailer lights,…

view full answer...

Answer 3

What is probably happening is that the collar around the receiver opening on the Curt hitch has a very thick powder coat that is preventing the Draw-Tite QSP #63080 from fitting properly. If you were to sand away some of the powder coat on the collar…

view full answer...

Answer 4

I just checked with all of our vendors and the correct custom fit wiring harness available for the 2023 Mazda CX-5 is the T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #C45FV.

view full answer...

Answer 5

For a hitch that fits your 2023 Mazda CX-5 Carbone Edition I recommend the etrailer #e98902. This hitch has a concealed cross tube and a bolt-on installation. What sets it apart from others is the matte black finish. This gives it an OEM look and…

view full answer...

Answer 6

The Curt Upgraded Circuit Protected Powered Tail Light Converter #C56496 along with the Powered Converter Wiring Kit #55151 are what you need to add wiring to your 2022 Mazda CX-5. Sometimes our fit system needs adjustments made and this is one of…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 10

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 11

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 12

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...