Curt Powered Tail Light Converter Installation - 2023 Mazda CX-50 Video

To add a hitch to your 2023 Mazda CX-5, I recommend the etrailer Hitch item #e98902. This is a class III hitch with a 2" receiver. It is custom fit and bolts to your Mazda with included hardware. I really like this hitch because the…

Yes, the Curt T-Connector Vehicle Wiring Harness #C45FV will fit your 2023 Mazda CX-5. I have linked an installation video below showing the installation on your vehicle.

Since you have an aluminum trailer I suggest using a tie-down that has a backing plate like #RR5K. This will help reinforce the tie-down since aluminum may not hold up. It would be even better if you can install the tie-downs to the frame of the…

Unfortunately the Curt wiring harness #C45FV would not activate the tow mode on your 2023 Mazda CX-50. According to Mazda, only their OEM wiring harness will work with the tow mode. You can absolutely still use the #C45FV to work your trailer…

To install a 7-Way harness on your 2023 Mazda CX-50 you will need two separate wiring harnesses because they don't make just one that'll do the job. The first harness you'll need is the Curt T-Connector Vehicle Wiring Harness item #C45FV.…

Yes. The etrailer License Plate Mounting Brackets for Hitch Mounted Cargo Carrier #e98944 is designed to be used on a cargo carrier like the etrailer #e98874.

The Ecohitch part #306-X7395 and the etrailer hitch part #e43ZR are very similar hitches that fit your 2022 Volkswagen Tiguan which accomplish the same goal. They provide a mostly hidden hitch where only the hitch opening hangs below the rear bumper.…

What is probably happening is that the collar around the receiver opening on the Curt hitch has a very thick powder coat that is preventing the Draw-Tite QSP #63080 from fitting properly. If you were to sand away some of the powder coat on the collar…

The Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector part #C59236 requires a connection directly to the battery using the provided in line fuse holder. It is more of a safety issue than anything else. There is no way to determine…

The etrailer e-track system #e42VR will work great in your aluminum utility trailer, but you will want to put a layer between the E-Track and the aluminum of your trailer. This layer will help prevent corrosion cause by contact of dissimilar metals.…

Powder coating and galvanization are both about the same in terms of rust resistance. If you like the black of the part #e42VR it would work just as well as a galvanized version #e62VR.

Yes. The etrailer Horizontal E-Track - Galvanized Steel - 2,000 lbs - 8' Long #e62VR can be driven on without any issue and have a maximum capacity of up to 6000-lbs each(break strength), so they'll be able to handle your ATV/UTV without…