Fenders to Replace EZ Loader Silver Step Fender 250-023725 On a Boat Trailer

Question

Question:

Looking for a single gray/silver plastic fender, EZloader # 250-023725. 14 inch rims, cut outs for lights and steps.

asked by: Mitchell W

0

Expert Reply:

I recommend looking at the Fulton Single Axle Trailer Fenders # F008594-2 as these are the closest we have to the EZ Loader 250-023725. We currently only offer these fenders as a set but they are universal for the left and right should you have one damaged again in the future or you can change both sides so they match. These fenders do not have any light cutouts but you would be able to cut a similar hole in them since they have a plastic construction like your current fenders. I have linked a review video for this set of fenders below where they will cover the different measurements for the fender as well.

expert reply by: Bud M

0

Answer 1

To mount the Fulton fenders #F008594-2 you can use L-brackets #CE26098G-2 and your choice of hardware (will vary depending on the material you would be attaching the fenders to). If the trailer already has some type of bracket it could potentially…

view full answer...

Answer 2

The Fulton Single Axle Trailer Fenders w Top and Side Steps - Silver Plastic - 14" Wheels - Qty 2 #F008594-2 does indeed come as a right and left hand side.

view full answer...

Answer 3

Based on the dimensions you gave me it looks like the Fulton Single Axle Trailer Fenders in White #F008574-2 or Silver #F008594-2 are what you are needing. These have a overall length of 42-5/8" with a measurement of 30-1/4" between the…

view full answer...

Answer 4

The 2x2 inch square axle is likely 3,500 lbs or less capacity. I would need more spindle dimensions or bearing numbers to assist. If you pull a hub and measure at the spindle where the bearings and seal ride using the digital caliper like #PTW80157 I…

view full answer...

Answer 5

Based on my research, the Trailer Hub and Drum Assembly - 8,000-lb E-Z Lube Axles #AKHD-865-8-EZ-K will be a replacement for the 90865 Rockwell hub and drum. Both of these hub and drum assemblies are 12-1/4" diameter, have an 8,000 lb capacity,…

view full answer...

Answer 6

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Answer 7

Thank you for purchasing from etrailer! You did a great job selecting compatible parts. When using Leaf Springs #e64SR with the #AP233 Equalizer Kit and the #H248 Hanger Kit, there should be 29-1/2" between the front and center hangers and…

view full answer...

Answer 8

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 9

The correct replacement for a Demco Master Cylinder 05680-C is the Replacement Master Cylinder part #5650. I spoke with Demco to confirm this for you.

view full answer...

Answer 10

The great thing about Bearing Buddy like part #BB1781 is that when you add grease to your system with the included fitting, it will move the spring-loaded piston outward and allow grease to seep around the edges to keep from damaging the seal. You…

view full answer...

Answer 11

The crank handle for the Lippert Components Spare Tire Winch with Offset Cable item #LC159056, is Replacement Crank Extension for Lippert Spare Tire Winch Assemblies - 35-1/2" item #LC1315411. The Spare Tire Winch item #LC159056 has a 1/2-inch…

view full answer...

Answer 12

I was able to find the OEM part number for the Chevy spare tire hoist but I was unable to find a weight capacity rating on it. The owner's manual for the 2015 Chevy Silverado 1500 and the original hoist can handle the weight of a full sized spare…

view full answer...