Mounting Brackets for Fulton Single Axle Trailer Fenders w Top and Side Steps for 14 Inch Wheels

Question

Question:

What hardware is needed to mount

asked by: DAle

0

Expert Reply:

To mount the Fulton fenders # F008594-2 you can use L-brackets # CE26098G-2 and your choice of hardware (will vary depending on the material you would be attaching the fenders to). If the trailer already has some type of bracket it could potentially work with the fenders or you may have to modify it to fit.

expert reply by: Michael H

0

Answer 1

I recommend looking at the Fulton Single Axle Trailer Fenders #F008594-2 as these are the closest we have to the EZ Loader 250-023725. We currently only offer these fenders as a set but they are universal for the left and right should you have one…

view full answer...

Answer 2

The Fulton Single Axle Trailer Fenders w Top and Side Steps - Silver Plastic - 14" Wheels - Qty 2 #F008594-2 does indeed come as a right and left hand side.

view full answer...

Answer 3

Yes, the Fulton Single Axle Trailer Fenders #F008594-2 that you referenced will work on an EZ loader trailer like yours. These were designed for 14 inch wheels like what you have and we've had customers come back and tell us they worked well on…

view full answer...

Answer 4

Based on the dimensions you gave me it looks like the Fulton Single Axle Trailer Fenders in White #F008574-2 or Silver #F008594-2 are what you are needing. These have a overall length of 42-5/8" with a measurement of 30-1/4" between the…

view full answer...

Answer 5

The 2x2 inch square axle is likely 3,500 lbs or less capacity. I would need more spindle dimensions or bearing numbers to assist. If you pull a hub and measure at the spindle where the bearings and seal ride using the digital caliper like #PTW80157 I…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 8

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

view full answer...

Answer 9

You can add larger wheels and tires to a trailer as long as you have enough room for the larger size. The main clearance issues we find when putting larger tires and wheels on a trailer is from the top of the tire to the fender and from the inside…

view full answer...

Answer 10

To find the load capacity for your axle you should look on the trailer VIN plate or sticker that lists the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that…

view full answer...

Answer 11

The three most common lug stud sizes for a trailer are 1/2"-20, 9/16"-18, and 5/8"-18. In order to make sure you get the correct lug nuts you need to measure the lug studs on the trailer now as we have no way to look this up for…

view full answer...

Answer 12

I am sorry I don't have any tires that are going to fit your rim. I do have a couple of comparable size tires that come in a wheel tire combo. I have listed the two below along with their lug patterns. 5 on 4-1/2 Lug Pattern - Kenda 205/65-10…

view full answer...

Mounting Brackets for Fulton Single Axle Trailer Fenders w Top and Side Steps for 14 Inch Wheels

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching