Gap Size on the Buyers Products 9/32" x 34" Class 2 Trailer Safety Chain

Question

Question:

What is the width of the quick link opening?

asked by: Heather F

0

Expert Reply:

The quick link opening on the Buyers Products 9/32" x 34" Class 2 Trailer Safety Chain # 337B93234SC measures 7/16" (see attached photo).

expert reply by: Jon G

0

Gap Size on Buyers Products 9/32" x 34" Class 2 Trailer Safety Chain
(click to enlarge)

Answer 1

The minimum length you'll get out of the BoatBuckle Heavy Duty Ratchet Transom Tie-Down Straps #IMF14206 is about 17" and that's inside hook to inside hook.

view full answer...

Answer 2

Since the strap itself on the BoatBuckle Heavy Duty Tie-Down Straps #IMF14206 measures 2' in length from the end to the middle of the "S" hook you will have more than enough length for the 18" space you mentioned. From where the…

view full answer...

Answer 3

The size winch that you will need depends on a couple of different factors. I have included part of our hand winch FAQ below regarding boat winches and have linked the FAQ article for you to view. Finding the Right Capacity Winch for your Boat…

view full answer...

Answer 4

The latch that you have on your current StepAbove could need to be adjusted so that it secures it tighter to your doorway. I attached a picture that I took from the instructions that shows how to make the adjustment. Try that and the movement should…

view full answer...

Answer 5

The three most common lug stud sizes for a trailer are 1/2"-20, 9/16"-18, and 5/8"-18. In order to make sure you get the correct lug nuts you need to measure the lug studs on the trailer now as we have no way to look this up for…

view full answer...

Answer 6

Yes! The Reese Goosebox #RP85FR will also fit on a Lippert 1621HD pin box like yours, so this is the correct part. I've linked a review video of this part for you to have a look at.

view full answer...

Answer 7

For a wheel and tire on an 8 inch rim that has a D load range rating with a 4 bolt pattern you would want the part #AM30153. I attached a review video for you to check out as well.

view full answer...

Answer 8

The Brophy hitch extender part #HR26 that you referenced will give you an addtional 12 inches of hitch extension and can be used with weight distribution. It has a rating of 10,000 lbs of trailer weight when used with a weight distribution system but…

view full answer...

Answer 9

There are a couple of major differences in the 3rd generation Reese Goosebox item #RP85FR over the prior models. First and foremost it now fits the Lippert Rhino pin box. This pin box is more common now than ever and 5th wheel owners will finally…

view full answer...

Answer 10

Though this technically will work when looking at all the measurements, I cannot recommend doing so. Here's my reasoning behind saying that. With your fully loaded trailer having a tongue weight of 315 pounds and your loaded bike rack weighing 50…

view full answer...

Answer 11

The 2-Speed Boat Trailer Winch part #315-W3200D is an excellent upgraded 3,200 lb winch for a boat trailer. In regards to mounting, not all winches use the same pattern so you'd need to compare the dimensions in the photo below to what you have…

view full answer...

Gap Size on the Buyers Products 9/32" x 34" Class 2 Trailer Safety Chain

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching