Will the Replacement Inner Memeber for Dexter Brake Actuators Work With a Folding Tongue

Question

Question:

Is the DX99FR for trailers with a straight tongue or can they be used for trailers that the tongue folds back for storage?

asked by: Steve

0

Expert Reply:

The Replacement Inner Member for Dexter DX7.5L Actuator # DX99FR is designed to specifically work with the Dexter DX7.5L and Legacy UFP brake actuators, so really the style of the tongue does not matter.

As long as you're replacing the inner member on either the Dexter DX7.5L or a Legacy UFP brake actuator, it'll work for your trailer.

expert reply by: Bryce D

0

Answer 1

The proper replacement inner assembly member for your UFP 34043 would be indeed be the the Dexter #DX99FR which is compatible with disc brakes. The replacement has an electric lock out and has a 7500K capacity and is intended to work with a 2 inch…

view full answer...

Answer 2

I may have a solution for you, but we don't offer replacement parts for your TieDown Engineering LP7000 actuator and I do know that they are becoming more difficult to come by in a lot of situations. However, we do have some replacement options…

view full answer...

Answer 3

We have the Dexter DX7.5L A-60 Brake Actuator w Electric Lockout #DX29FR for disc brakes and the Dexter DX7.5L A-60 Brake Actuator #DX27FR for drum brakes that will be a better option. These will have similar bolt patterns as your Tie Down…

view full answer...

Answer 4

The Dexter Actuator Inner Member part #DX99FR is designed as a replacement center section for the Dexter DX7.5L A-60 part #DX56FR which was designed to fit a 3 inch wide by 5 inch tall straight trailer tongue. If you are looking for a coupler…

view full answer...

Answer 5

Yep! The Dexter DX7.5L #DX29FR is indeed designed to fit inside a 3" x 4" tongue as long as you have disc brakes on your trailer, though it is a bit of a different design than your old TDE LP7000. I included a video where Ryan installs it…

view full answer...

Answer 6

The Dexter DX 7.5 actuator part #DX89FR that you referenced is a very similar design to the Tie Down LP 7000 that you referenced. This would be a great replacement solution that may not bolt up exactly the same but would still work great.

view full answer...

Answer 7

The customer review you are referencing is for a similar DX7.5L actuator. We put those reviews there when there is not enough reviews for the particular item to give you a good understanding of the reception. That being said, I called Dexter to…

view full answer...

Answer 8

In terms of capability the Dexter DX7.5L A-60 Brake Actuator w Electric Lockout - Bolt On - Disc - 2" Ball - Zinc - 7.5K #DX89FR is a good replacement option. The problem is the design of your old TDE LP7000 which was installed inside the tongue…

view full answer...

Answer 9

The UFP 34044 is basically the Dexter DX7.5L A-60 part #DX89FR. The second number you mentioned is actually a phone number. But the #DX89FR would be an exact replacement for what you have.

view full answer...

Answer 10

For the LCI52-SB-86.5-68.5, the two ending measurements are: 1st - measurement from hub to hub, meaning the length of the axle in this case is 86.5 inches. 2nd - spring seat dimension where they're welded, meaning the spring seats are 68.5 inches…

view full answer...

Answer 11

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 12

Based on my research, the Trailer Hub and Drum Assembly - 8,000-lb E-Z Lube Axles #AKHD-865-8-EZ-K will be a replacement for the 90865 Rockwell hub and drum. Both of these hub and drum assemblies are 12-1/4" diameter, have an 8,000 lb capacity,…

view full answer...