Highest Capacity 5TH Wheel Hitch To Fit Puck System On a 2024 Ford F-350

Question

Question:

What is the strongest 5th wheel hitch made to fit the factory pucks on my 2024 Ford F-350 Long Bed Dually Crew Cab?

asked by: Kit

0

Expert Reply:

The Reese M5 5th Wheel Trailer Hitch # RP68FR has the highest capacity of any hitch that will drop into the factory pucks on your 2024 Ford F-350. This hitch is rated for trailers up to 32,000lbs with a tongue weight up to 6,400lbs.

expert reply by: Bud M

0

Answer 1

The Reese M5 5th Wheel Trailer Hitch for Ford Towing Prep Package item #RP68FR weighs 204 lbs. This hitch does fit the Ford factory puck system.

view full answer...

Answer 2

The hitch with the highest towing capacity as of right now for your 2021 Ford F-350 is the Reese M5 5th Wheel Trailer Hitch for Ford Towing Prep Package #RP68FR. This hitch will fit with your OEM prep package and has a 1-piece, wraparound jaw and…

view full answer...

Answer 3

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…

view full answer...

Answer 6

Hey David, from previous customers of ours who have the same 2020 Keystone Raptor 424 we have determined that your pin box style is the Lippert 1621 which means for a Gen-Y gooseneck adapter you'd want the #GY58GR that you referenced.

view full answer...

Answer 7

The head alone for the B&W Companion hitch #BWRVK3500 weighs about 70 pounds. Everything else weighs about 130 pounds. So the total weight of the hitch is approximately 200 pounds.

view full answer...

Answer 8

If you take a look at the linked diagram you can see the minimum recommended clearance distances between truck and trailer for 5th wheel towing. It is recommended to have at least 5-inches from the top of the bed rails to the bottom of the trailer…

view full answer...

Answer 9

I spoke with my contact at Trailair and from your serial number we were able to determine that your trailer came with a 1621 HD pin box which is a long pin box style. I was unable to obtain the exact part number for your Trailair pin box but from the…

view full answer...

Answer 10

Most fifth wheel rails are made to the same industry standard dimensions. They aren't all though. If you measure 22 inches on center between the two rails and they look like the rails of the #RP30035 that you referenced they would be the industry…

view full answer...

Answer 11

A wedge is needed, yes, and the Lippert Turning Point pin box does come with a universal wedge, but it is not a very good fit with the B&W Companion #BWRVK3710. So I highly recommend instead using the 5th Airborne Custom Wedge for B&W Fifth…

view full answer...

Answer 12

The safe GVWR rating is 80-85% of total weight capacity to allow for any additional weight added to the trailer. So for a 16k pin box you'd be looking at 12,800lbs - 13,600lbs as a safe weight. I looked up your current pin box with the LCI Number…

view full answer...

Highest Capacity 5TH Wheel Hitch To Fit Puck System On a 2024 Ford F-350

Product Page this Question was Asked From

Continue Researching