Black or Smoke Colored Translucent RV Roof Vent Cover For a Fan-Tastic Vents Fan

Question

Question:

I’m looking for a Dometic or like vent van cover in black but needs to be translucent. Grey translucent is also an option. This will be covering a Fantastic fan

asked by: Michael C

0

Expert Reply:

For your Fan-Tastic Vents fan, you want the MaxxAir FanMate RV and Trailer Roof Vent Cover # MA00-955003. This is your best option for your Fan-Tastic vents fan and has the translucent feature you are needing. It is a smoke (grey) color.

expert reply by: Scott S

0

Answer 1

Since the MaxxAir Standard RV and Trailer Roof Vent Cover #MA00-933069 can fit basically all standard RV covers it would fit and work great on your 2017 T and B 320S.

view full answer...

Answer 2

Yes, the MaxxAir II RV and Trailer Roof Vent Cover w/ EZClip In White #MA76JR, Black #MA86JR and Smoke #MA26JR will attach to the mounting tabs already found on MaxxFan and MaxxFan Plus roof vents. You may not be able to fully open the roof vent…

view full answer...

Answer 3

Most roof vents follow the standard size opening. That size is 14-1/4 inches by 14x1/4 inches but it is most commonly referred to as 14 x14. Many different vents on the inside and outside flanges can have different measurements to gain a certain…

view full answer...

Answer 4

The Reese Goose Box 5th-Wheel-to-Gooseneck Air Ride Coupler Adapter part #RP85FR is compatible with the gooseneck tripod stabilizer Ultra-Fab Gooseneck Trailer Tripod Stabilizer part #UF19-950450 which I recommend. The Ultra-fab tripod has a height…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

Actually the type of roof vent cover you need to attach to the vent cover brackets of your Maxxair 4951KS like part #MA00-04500K is the part #MA00-955003 which uses those brackets with the included cotter pins of the cover.

view full answer...

Answer 7

The MaxxAir FanMate vent cover Item #MA00-955001 is going to be just a little taller but the louvred end tapers in and it does not come with the screen which is Item #MA00-955202. 25" long x 18-1/8" wide x 10-1/4" tall. The MaxxAir II…

view full answer...

Answer 8

I emailed my contact at SoftStart and inquired about the difference between the #SSR54FR and the SSRV3T. The products are exactly the same. The SSRV3T is simply SoftStart's internal part number which we refer to as part #SSR54FR.

view full answer...

Answer 9

Yes the operator replacement part #MA10-20281K-1AF that you referenced will work as a replacement for your Maxxfan #4951ks.

view full answer...

Answer 10

Both the MaxxAir Standard RV and Trailer Roof Vent Cover part #MA00-933066 and the Camco RV and Enclosed Trailer Roof Vent Cover w/ Detachable Louvered Screen part #CAM40431 are designed to fit 14" x 14" roof vents. The overall dimensions…

view full answer...

Answer 11

Yes, the MORryde Cushioned 5th Wheel Pin Box #MR55QR will fit your Grand Design Momentum 395MS. The MORryde is designed to replace the Lippert Rhino and will significantly improve your ride quality. It is for 5th wheel trailers with a GVWR over…

view full answer...

Black or Smoke Colored Translucent RV Roof Vent Cover For a Fan-Tastic Vents Fan

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching