Trailer Hitch Receiver Fit For 2022 Lexus RX 350 F Sport

Question

Question:

Need to know if you sell a trailer hitch for a 2022 Lexus RX350 F Sport? Thank you.

asked by: Dennis L

0

Expert Reply:

We do indeed sell a trailer hitch receiver that is a verified fit for your 2022 Lexus RX 350 F Sport. The correct hitch for your vehicle is the following part number:

- Draw-Tite Max-Frame Trailer Hitch Receiver # 75540

expert reply by: Kyle S

0

Answer 1

Yes we do have a hidden hitch that fits your 2022 Lexus RX 450h with the Draw Tite part #DT58GR. This hitch has a removable lower section so when you aren't using it can be removed and you'd never know a hitch was installed!…

view full answer...

Answer 2

The only way to transport a heavy e-bike, like a Aventon Aventure, is to use a hitch mounted bike rack. I recommend the Hollywood Racks Sport Rider SE Bike Rack item #HLY84FR. This bike rack has a 80 lbs per bike capacity and fits tires up to…

view full answer...

Answer 3

Yes, the Draw Tite hitch part #DT58GR that you referenced is a confirmed fit for your 2022 Lexus RX 350 F Sport. There's no drilling involved to install this hitch but there is some minor heat shield modification required. If the vehicle has a…

view full answer...

Answer 4

Yes the EcoHitch part #EH53VR is a confirmed fit for your 2021 Toyota Prius XLE and would provide you with a 2 inch trailer hitch.

view full answer...

Answer 5

I have taken a look at the Draw-Tite Max-Frame Trailer Hitch Receiver item #75540. This hitch is confirmed to fit your 2022 Lexus RX 350 and it does require some minor trimming of the lower portion of the rear trim. I have linked a couple of pictures…

view full answer...

Answer 6

The Draw Tite Hitch part #DT58GR that has the removable lower hitch opening does fit your 2022 Lexus RX 350 F-Sport. You would have to make some very minor heat shield modifications to install the hitch but the bumper and rear fascia would not need…

view full answer...

Answer 7

According to EcoHitch, their X7404 hitch, which we offer as part #EH53VR is a fit for your 2022 Toyota Prius AWD. The install involves removing the rear bumper and bumper fascia temporarily, as well as trimming an under-body panel (not the fascia).…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 12

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...