Will Rhino-Rack Roof Rack Fit 2006 Jeep Wrangler Rubicon

Question

Question:

Will this work for a 2006 2 door Jeep Runicon?

asked by: Dan

0

Expert Reply:

The Rhino-Rack Roof Rack Legs # RL150S2 are designed to fit factory rain gutters on certain models of the Jeep Cherokee and Liberty. Unfortunately, there is not a rain gutter mount for your Rubicon. If you want to add the Rhino-Rack square bars shown with these legs to your 2006 Jeep Wrangler Rubicon you will need the following:

-Rhino-Rack Heavy-Duty Roof Rack Crossbars # RB1500B-2

-Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars # RRRLT600

-Rhino-Rack RT-Style Roof Rack Tracks # RRRTS547

-Roof Rack Leg Spacer Blocks for Rhino-Rack Heavy-Duty Crossbars # RRQMHD05-2

This is assuming you have a hard top with no existing rails or crossbars. If you want to stick with square bars but you don't want to install rails on the top of your Jeep, I recommend the Thule SquareBar Evo roof rack system instead. This will also allow you to mount the rack on your factory rain gutters. You will need the following:

-Thule SquareBar Evo Crossbars # TH712500

-Rapid Gutter Feet for Thule Crossbars # TH93ZR

Keep in mind, if you don't want a bunch of wind noise square bars aren't the way to go. Some people get a rack like this and quickly decide the noise is too much. If you think that might be you, you can still use the Thule Rapid Gutter Feet with the aero-style WingBar Evo Crossbars # TH711520 which will be a lot quieter.

I have attached some installation videos below for your reference.

expert reply by: Robin H

0

Answer 1

The Rhino-Rack Roof Rack Legs for Land Rover Defender #RL210DS8 are a specific fit for the Land Rover Defender while the Rhino-Rack Roof Rack Legs #RL210S2 are more of a universal fit. With that being said, we will want to make sure everything you…

view full answer...

Answer 2

For your 2023 Jeep Wrangler Unlimited we have the Rhino-Rack Vortex Aero roof rack. This has the additional clearance needed to still allow you to use your Sky One-Touch top with the crossbars in place. To complete the roof rack you will need the…

view full answer...

Answer 3

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof…

view full answer...

Answer 4

Yes, you can use the Rhino-Rack SG Roof Rack for Rain Gutters #RRSG59 with the Sky One Touch roof on your 2021 Jeep Wrangler Unlimited as long as you don't open up the roof with the roof rack installed. If you wanted an option with enough…

view full answer...

Answer 5

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 6

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 7

The Rhino-Rack Heavy-Duty Roof Rack Roof Rack have specific C-channels that are designed to fit specific Rhino-Rack Heavy-Duty accessories, like the Rhino-Rack Hi-Lift Jack and Shovel-Holder Brackets #RRRCB-RSHB-RJHB as an example. That's the…

view full answer...

Answer 8

Hey Alec, For your 2016 Ford Fusion I recommend the recommend a roof rack from Inno: Inno Aero Crossbars #INXB138-145 Inno Through Feet for Aero Crossbars #INXS250 Custom Fit Kit for Inno XS200, XS250, and INSU-K5 Roof Rack Feet #INK860 As with any…

view full answer...

Answer 9

Hi Nathan, The Rhino-Rack Roof Rack Legs #RRRL110S5-2 are a fit for the gutters on your 2023 Jeep Wrangler, but they are only 4-5/16" tall so you'd likely run into clearance issues with the sky top. To confirm you can measure up 4-5/16"…

view full answer...

Answer 10

Hey there Stormy, I think we can figure this out, as there are a quite a few options. First, let's just discount the heavy-duty rack, as those are just oddly shaped crossbars and there's nothing HD about them (like you mentioned, they have…

view full answer...

Answer 11

We do offer tow bar setups that can attach to the D-rings on the Warn Elite Bumper. Your will need to use a D-ring adapter to connect the tow bar. For the adapter you have the following options: 1" Thick D-Rings #RM-035-1 3/4" Thick D-Rings…

view full answer...

Answer 12

Whether or not you can flat tow with a Jeep bumper is really up to the manufacturers testing; some of the big names like MetalCloak or Poison Spyder have bumpers with D-ring attachments that can be used for flat towing connections. This is great…

view full answer...