Snap-On Towing Mirrors For 2018 Jeep Wrangler JL

Question

Question:

Hello, Do you have any snap on mirrors for a 2018 Jeep Wrangler JL model? I see the ones that say theyre for JK but wasnt sure if these would fit the JL? Thank you

asked by: Jessica

0

Expert Reply:

Yes, there are snap-on towing mirrors that fit your 2018 Jeep Wrangler JL, which I verified directly with the manufacturer for you. The correct fit for your Jeep are the following:

- K-Source Snap & Zap Custom Towing Mirrors - Snap On # KS39NQ

expert reply by: Kyle S

0

Answer 1

As you already have a 4-way pin connector the 7-Way Kit #ETBC7 will provide you the additional wiring you need to connect a brake controller and charge line. This will connect to your current 4-way and will give you a 4-way flat as well as a 7-way so…

view full answer...

Answer 2

I am happy to explain why the yellow wire and blue wire are tucked away in the installation video of 7-Way RV Upgrade Kit for Trailer Brake Controller Installation part #ETBC7L. The ETBC7L is a kit used to install the Curt Echo Wireless controller…

view full answer...

Answer 3

I spoke to Draw-Tite about installing their Class III Hitch #DT78MR on a 2021 Wrangler with the diesel motor, and they said they recently did a redesign to get it specific to the diesel models. We do not have an install video of this as of yet, but…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 7

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 8

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 9

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 10

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 11

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 12

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Snap-On Towing Mirrors For 2018 Jeep Wrangler JL

Product Page this Question was Asked From

Continue Researching