Review of Draw-Tite Trailer Hitch - Custom Fit Hitch - DT78MR Video

The trailer hitch I recommend for your 2019 Jeep Wrangler is the etrailer.com hitch part #E98856 because it's made in the USA, has great weight capacities, and has an extended hitch tube to make fitting hitch bike racks easier to fit around the…

For your 2019 Jeep Wrangler I recommend the Draw-Tite Max-Frame Trailer Hitch #DT78MR because it features the highest weight capacity available for your Jeep. This particular Class III hitch has a 4,500 pound towing capacity and a 675 pound tongue…

As you already have a 4-way pin connector the 7-Way Kit #ETBC7 will provide you the additional wiring you need to connect a brake controller and charge line. This will connect to your current 4-way and will give you a 4-way flat as well as a 7-way so…

The Draw Tite hitch part #DT78MR is actually the current version of the 76104 that you mentioned.

We can't recommend you drill into the base plate to mount the breakaway switch as that would void the warranty of the base plate kit. Instead I would recommend mounting the switch to the bumper of the vehicle.

I am happy to explain why the yellow wire and blue wire are tucked away in the installation video of 7-Way RV Upgrade Kit for Trailer Brake Controller Installation part #ETBC7L. The ETBC7L is a kit used to install the Curt Echo Wireless controller…

The Draw-Tite Max-Frame Trailer Hitch Receiver #DT78MR that you referenced has plates which measure 13" long and 6" high. The receiver portion comes out about 6-1/2" from the plate that will be more towards the bumper. I have attached…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

I spoke to Draw-Tite about installing their Class III Hitch #DT78MR on a 2021 Wrangler with the diesel motor, and they said they recently did a redesign to get it specific to the diesel models. We do not have an install video of this as of yet, but…

The size of the bolts that come with the Draw Tite hitch part #DT78MR are M12X1.75X120 but more importantly this does fit the Willys version of your 2021 Jeep Wrangler.

If you are worried about the possibility of a bike rack hitting your flat towed 2013 Toyota Tacoma, then a few quick measurements might help. Hollywood Racks RV Rider Bike Rack #HLY64FR, measures 32 inches from the center hitch pin hole to the…

The correct covers for 1-1/2" openings are the Roadmaster EZ Base Plate 1-1/2" Receiver Covers - Qty 2 Item #RM-210.