Recommended Replacement for 5,200 Lb Torsion Trailer Axle
Question:
Looking to replace my single axle 5200 lbs torsion off a 2003 Rogue trailer. Axel part#6605F, Hub part#6614NB 6 lug. What are my options with the least amount of fab work? Thank you,
asked by: Larry H
Expert Reply:
I do have replacement options for you but we don't carry torsion axles so the only options we can offer you are axle-less like the Timbren Axle-Less Trailer Suspension part # ASR5200S01 or leaf spring axles like the Trailer Axle Beam part # e55GR which has close but not the same dimensions as your existing. The spring seats however can be moved but in order to go this route you'd also need the Single-Axle Trailer Hanger Kit for Double-Eye Springs part # APS4 and 6-Leaf Double-Eye Spring for 5,300-lb Trailer Axles part # e76SR.
The least amount of fab work option would be to reach out to a custom axle maker like Dexter and get one made to your exact specifications but this will not be cheap.
(click to enlarge)
Products Referenced in This Question
Single-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front, 1-1/4" Rear
- Trailer Suspension Parts
- Hangers
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Single Axle
- etrailer
more information >
6-Leaf Double-Eye Spring for 5,300-lb Trailer Axles - 24-7/8" Long
- Trailer Leaf Springs
- Double Eye Springs
- 5300 lbs
- 1-3/4 Inch Wide
- 6 Leaf
- 24-7/8 Inch Long
- Painted
- etrailer
more information >
Product Page this Question was Asked From
Timbren Axle-Less Trailer Suspension - Standard Duty - No Drop - 5 Bolt Flange - 5,200 lbs
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- 5200 lbs
- Spindles Only
- Universal Fit
- No Drop or Lift
- Timbren
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: 4-Leaf Double-Eye Spring for 6,000-lb Trailer Axles - 25-1/8" Long
- Shop: 6-Leaf Double-Eye Spring for 5,300-lb Trailer Axles - 24-7/8" Long
- Shop: Timbren Axle-Less Trailer Suspension - Standard Duty - No Drop - 5 Bolt Flange - 5,200 lbs
- Shop: 6-Leaf Double-Eye Spring for 7,000-lb Trailer Axles - 24-7/8" Long
- Shop: Trailer Axle Beam with Easy Grease Spindles - 89" Long - 5,200 lbs
- Shop: Dexter Nev-R-Adjust Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 6K
- Q&A: How to Determine if a Torsion Axle Needs to be Replaced and Lifting a Trailer Off the Ground
- Q&A: Picking Out Replacement Leaf Springs for 1999 Fleetwood Prowler 26A
- Search Results: dexter
- Video: Review of Redline Boat Trailer Parts - Trailer Square U Bolts With Hardware - 7163183UB
- Video: Review of CE Smith Boat Trailer Parts - Stainless Steel U Bolt With Hardware - CE15502A
- Shop: Trailer Axle Beam with Easy Grease Spindles - 95" Long - 5,200 lbs
- Search Results: hi~spec
- Search Results: trailer stone guard
- Article: Must-Have Flat Towing Components
- Search Results: 7x14.5
- Search Results: 7x14.5 trailer tire
- Q&A: Trailer Suspension Hanger Kit for Slipper Springs and 38 inch Wheelbase
- Shop: Trailer Hitch
- Search Results: 44649
- Article: Trailer Wiring Diagrams
- Search Results: 68149
- Q&A: Replacement Clearance Lights Needed for GLO-BRITE 122R and 122Y Lights
- Article: How to Accurately Measure Trailer Leaf Springs
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Shop: Trailer Wiring
- Q&A: Seal With Dimensions to Replace 171255UC
- Shop: Fifth Wheel Hitch
- Article: Trailer Tire Sizing
- Q&A: How to Determine if Trailer Axle is Not Aligned and How to Measure to Replace Trailer Axle
on Trailer Suspension Parts
