EcoHitch Hidden Trailer Hitch Installation - 2015 Honda Civic Video

I did contact the manufacturer on your behalf and per the engineering team at Eco Hitch, you can drill the hole in the sheet metal as you suggested to complete your install of the Eco Hitch Hidden Trailer Receiver #306-X7221. Another option you…

I went ahead and contacted my tech at Torklift (the makers of EcoHitch) about the #EH97FR, and he confirmed that all M12 hardware will be torqued to 70 ft/lbs and all 1/4" hardware will be torqued to 8 ft/lbs. I went ahead and attached the…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

You'll most likely damage the vehicle frame before you do the hitch when you exceed the tongue weight capacity of a vehicle. The trailer hitch from Curt part #C11391 that fits your 2012 Honda Civic has a tongue weight capacity of 200 lbs which…

For your 2015 Honda Civic coupe SI you would want the Curt Hitch part #C11391 that has been confirmed to fit your vehicle. It wouldn't stick out to far, if you check out the picture I attached you will see exactly where it will sit on your…

The EcoHitch #306-X7235 you purchased uses 3/8" fish wire so you'll need to purchase one of #C58390 to allow you to finish the install of your hitch. I also included a video where Dave installs the #306-X7235 to hopefully help make using the…

The Karrier ST175/80R13 Radial Trailer Tire with 13" Galvanized Wheel - 5 on 4-1/2 - Load Range D #AM31994 will fit on a single yacht club jet ski trailer that has a bolt pattern of 5 on 4-1/2 inches. You will want to make sure that you have the…

If your trailer has a 2 inch coupler then you definitely need to go with a 2 inch ball. Even though 1/8 inches doesn't sound like very much, it is enough that your trailer could come uncoupled under the right conditions. I have attached a link to…

The Rhino-Rack RLCP Leg Kit for OEM Fixed Mounting Points - Pad Mount - Qty 6 RLCP02 are not compatible with the Yakima Track System, however, I do have a fit. The Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks -…

I recommend first installing a trailer hitch on the back of your Rpod, and then a hitch mounted bike carrier. The trailer hitch I recommend is the Curt Adjustable Width Trailer Hitch, part #13703. This will work with RVs that have a frame width…

The 2 inch EcoHitch part #306-X7235 that fits your 2013 Honda Civic SI has a tongue weight capacity of 300 lbs and a trailer weight capacity of 2,000 lbs so it would easily handle the weight of a carrier and Yamaha R6 or R1.

Yes, the Curt #C11391 would work, but there are some other factors that really make the EcoHitch a much better option. First, considering you've got a 2015 Honda Civic, ground clearance is going to be an issue since both the cross tube and…