Furrion Side Cameras Come On When Brake Pedal is Pressed
Question:
Furrion 7s camera system with side view. Wired side view cameras with trigger signals as per prints. Problem: touch my breaks and either the right or left camera comes on. It works fine when I turn on the blinkers.
asked by: Alan H
Expert Reply:
In regards to the LED Marker Light RV Side Cameras part # FCE48TASL, there are only three wires you should be using. The brown and red wire get tied together and then attached to the running light power wire coming from the old light, the black wire get tied into the ground wire coming from the old light. I recommend checking over all the wiring to ensure you have it wired as such. I did a video on this exact process if you want to fast forward to the 10:00 mark in the video linked below.
Toni R.
3/13/2024
Yeah, checked and double checked and I have the same problem. Has anyone found a solution? I even went in and made sure I had independent grounds, traced to the 7 pin and everything is as the instructions say, but I still get one camera or thenl other when the brakes are pushed.
Product Page this Question was Asked From
LED Marker Light RV Side Cameras w/ Night Vision for Furrion Vision S Systems - Qty 2
- Accessories and Parts
- RV Camera System
- Camera
- Side Camera
- Right Side Camera
- Left Side Camera
- Black
- Furrion
more information >
Continue Researching
- Shop: Curt 2 to 3 Wire Tail Light Converter
- Shop: Vehicle Tow Bar Wiring
- Q&A: Troubleshooting A Furrion Camera System That Switches To Side Cameras When The Brakes Are Applied
- Q&A: Why Does My Vehicle Have Separate Turn and Brake Signal Wires
- Shop: LED Marker Light RV Side Cameras w/ Night Vision for Furrion Vision S Systems - Qty 2
- Shop: 7-Way Vehicle Power Adapter for Furrion RV Observation Camera
- Video: Furrion Vision S LED Marker Light RV Side Cameras Installation - 2022 Jayco Eagle HT Fifth Wheel
- Shop: 12V PWM Filter for RV Backup Camera Systems - Hardwire
- Video: Review of Furrion RV Side Marker Light and Camera System - FCE48TASL
- Q&A: Will The Furrion Camera System Work With The In-Dash Display On A 2023 GMC Sierra 2500 AT4
- Q&A: Should Lube Plate of Fifth Wheel Hitch be Removed From Trailer When Stored
- Q&A: What is Yellow Wire For on Furrion LED Marker Light RV Side Cameras
- Q&A: How to Power Furrion Side Marker Camera to Pair With Monitor
- Q&A: Furrion Cameras Constantly Stay On Even When Unhooked With Grand Design Trailer Pre-wired For Camera
- Shop: Valterra RV Sewer Hose Carrier - Adjustable - 50" to 94" - Black
- Shop: Valterra EZ RV Sewer Hose Carrier - 26" - Black
- Shop: Camco RhinoEXTREME RV Sewer Hose w Swivel Fittings, 4-in-1 Adapter, and Caps - Black - 15' Long
- Video: Camco RhinoEXTREME RV Sewer Hose with Swivel Fittings Manufacturer Review
- Video: Review of Valterra RV Sewer - Hose Carrier - A04-5094BK
- Search Results: pin box
- Video: Blue Ox Patriot Radio Frequency Portable Braking System Review
- Article: Trailer Wiring Diagrams
- Shop: Base Plate for Tow Bar
- Search Results: 44649
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Trailer Hitch
- Search Results: 25580
- Video: Roadmaster Tow Bar Wiring - Splices into Vehicle Wiring - RM-15267 Review
- Video: Review of Blue Ox Tow Bar Braking Systems - Patriot Portable Braking System - BLU37TR
- Search Results: dust cap
Statick
3/30/2024
Mine does this as well and it’s frustrating! I didn’t change any of the wiring since the instructions indicate we could ‘plug and play’ by sliding the camera into the existing side marker. Makes it very hard to use the rear camera for backing up and I’ll be contacting Furrion.