Replacement Tarp For Extang Revolution Tonneau Cover 54425

Question

Question:

Can you verify that this is the proper replacement tarp for the 54425.

asked by: Chuck H

0

Expert Reply:

I can; you are 100 percent correct that the replacement tarp for the Extang Revolution 54425 tonneau cover is the following part number:

- Replacement Tarp for Extang Revolution Soft Tonneau Cover # EX53425

expert reply by: Kyle S

0

Answer 1

I would be happy to help you find a replacement cover for your 2012 Ram 1500. I just spoke with my rep at Extang and he gave me two replacement options for you and told me the covers for the Extang Revolution series only come in vinyl. The first is…

view full answer...

Answer 2

You will need the Replacement Tarp #EX53780 for the Extang Revolution Soft Tonneau Cover 54780 that fits your 2011 Ford F-150 with the 6-1/2' bed.

view full answer...

Answer 3

The Hollywood Racks Sport Rider SE Bike Rack for 2 Electric Bikes - 2" Hitches, part #HLY84FR, will be able to transport these two bikes. The rack can support up to 80lbs per bike. The rack is also fat tire compatible. The rack can tilt…

view full answer...

Answer 4

You will need the Replacement Tarp #EX53445 to replace the tarp on the Extang Revolution soft tonneau cover (EX54445). This is the Revolution tonneau cover which fit the 5-1/2' bed on a your 2015 Chevrolet Silverado crew cab. The Tarp #EX54PR…

view full answer...

Answer 5

Yes, the correct replacement tarp for the Extang Revolution Soft Tonneau Cover on a 2008 Chevrolet Silverado 1500 is the Replacement Tarp for Extang Revolution Soft Tonneau Cover part #EX53645 for 5-1/2' beds or part #EX53650 for 6-1/2'…

view full answer...

Answer 6

I spoke with my contact at Extang and described to him the part needed. It is the slide block #EX1077.

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

Because the Retrax PRO MX Tonneau Cover #RT80467 for the 2019 Chevy Silverado 2500 covers the bed rails, you would not be able to use a ladder rack like the Thule TracRac #TH27000XT since that rack requires the use of the bed rails. The only tonneau…

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Replacement Tarp For Extang Revolution Tonneau Cover 54425

Product Page this Question was Asked From

Continue Researching