Replacement Handle For Extreme Off-Road Swing-Up Trailer Jack w/ Dual Wheels

Question

Question:

I have the Ark extreme swing up jack is there a replacement handle available?

asked by: Lew

0

Expert Reply:

There is a replacement handle for the Extreme Off-Road Swing-Up Trailer Jack w/ Dual Wheels part # ORJW750D with Replacement Jack Handle for Extreme Off-Road Trailer Jack part # ORJW750SH.

expert reply by: Heather A

0

Answer 1

Thank you so much for the pictures and descriptions! It looks like you have the Pro Series Snap-Ring Swivel Marine Jack #PSEJ10000101 so for a replacement that will install directly to the mounting plate that is already welded on your trailer frame I…

view full answer...

Answer 2

We have the Replacement Jack Handle #ORJW750SH which will fit your Xtreme Off-Road Swing-Up Trailer Jack #ORJW750BD. This handle has a zinc finish as opposed to the black finish on your jack.

view full answer...

Answer 3

Yes, you will be able to also use the CIPA Universal Dual Lens Towing Mirrors #11953-2 as well on your 2019 Jeep Wrangler JL. I have sent this information to our fit guide team to have it updated since the mirrors on the 2020 Jeep Gladiator in the…

view full answer...

Answer 4

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 5

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 6

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 7

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 8

When installing/adjusting the Solera RV Slide-Out Awning #LCV000163285 tension is applied by rotating the awning roller 14 times. This should apply the needed spring tension so that the fabric doesn't billow in the wind or leave enough slack that…

view full answer...

Answer 9

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 10

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Answer 11

For all intents and purposes, yes, the Fulton drop leg stabilizer jack SJL80300 is the same as the square leg jack you asked about: - Square Drop Leg Stabilizer Jack - 18" Travel - 2,000 lbs #SJ-R208 Different manufacturers but otherwise they…

view full answer...

Answer 12

Your trailer looks awesome! The Road armor equalizers #LC696740 and Equa-Flex Cushioned Equalizers #LC279687 are both pretty similar in performance even though the Road Armor has two dampers. The main difference is the size of the equalizers. The…

view full answer...

Replacement Handle For Extreme Off-Road Swing-Up Trailer Jack w/ Dual Wheels

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching