Replacement Brakes, Hubs, and Brake Lines for a 2004 EZ Loader 4-TEZR 23-25/27

Question

Question:

Good Morning, Im looking to replace my brake assembly from the actuator back and replace the entire Hub and Drum Kit as well backing plate. Could you please assist me in making sure I get the correct parts? My trailer: 2004 EZ Loader 4-TEZR 23-25/27 5800, Wheel/Tire Size: ST215/75R14. Thank you for the help!

asked by: Sterling

0

Expert Reply:

Since you have 14" wheels that tells me you have 3,500 lb axles so you need the following:

- Hydraulic Trailer Brake Kit - Uni-Servo - Free Backing - 10" # AKFBBRK-35
- Hub/Drum with 5 on 4-1/2" Bolt Pattern # AKHD-545-35-EZ-K
- Hub/Drum with 6 on 5-1/2" Bolt Pattern # AKHD-655-35-EZ-K
- Dexter Hydraulic Brake Lines for Torsion-Axle Trailers # T4830000

If you have a different weight capacity for your axles please let me know and I'll be more than happy to make some different recommendations for you!

expert reply by: Jon G

0

Answer 1

You can mount the fenders directly to the trailer frame through the fender skirt on the back of the fender. I would recommend using large washers if you drill through the fender skirt and attach the fender directly to the trailer frame. If mounting…

view full answer...

Answer 2

Yes, all of our tire/wheel combos are compatible with brakes on a trailer. Since you are looking for a combo to put on your boat trailer I recommend going with the Karrier ST215/75R14 Radial Trailer Tire with a Galvanized Wheel #AM32182. This combo…

view full answer...

Answer 3

These brakes #AKFBBRK-35-D have 10" drums and 2-1/4 shoes. Of all the brake kits we sell of that size, they are all a 4 bolt mounting flange pattern. If your current axles have an inner bearing number of L68149 (1.378" inner…

view full answer...

Answer 4

view full answer...

Answer 5

I can see why this might be cause for concern, but I confirmed with my tech contact over at HydraStar that when you install the HydraStar EOH Actuator Adapter #HBA-CAM on your trailer that this will not be an issue and it will function correctly…

view full answer...

Answer 6

If you currently have disc brakes on your trailer and are looking to convert to an electric over hydraulic setup you don't have to replace the brakes as long as they are working properly. All you really need to do is disconnect the brake line…

view full answer...

Answer 7

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 8

The tires on your trailer should not come off the ground while leveling. It sounds like you just need to reset the zero point. In order to do this you will need to follow the steps I have attached for you below and in the photo. If this does not fix…

view full answer...

Answer 9

The great thing about Bearing Buddy like part #BB1781 is that when you add grease to your system with the included fitting, it will move the spring-loaded piston outward and allow grease to seep around the edges to keep from damaging the seal. You…

view full answer...

Answer 10

I was able to find the OEM part number for the Chevy spare tire hoist but I was unable to find a weight capacity rating on it. The owner's manual for the 2015 Chevy Silverado 1500 and the original hoist can handle the weight of a full sized spare…

view full answer...

Answer 11

The Lippert Components Spare Tire Winch with Offset Cable #LC159056 will not have any locking or hold mechanism short of being completely reeled in. I spoke to my tech contact at Lippert who has this on his truck and he said you just crank it up…

view full answer...