Will TorkLift SuperHitch TLD1102 Fit 2006 Ram 2500 Short Bed 4x2?

Question

Question:

Hello WIll this fit 2006 Ram 2500 short bed 4x2 with the spring mounts that hang down below the frame? If not what do you recommend?

asked by: Randy

0

Expert Reply:

Yes, the TorkLift # TLD1102 you were looking at will work with your 2006 Ram 2500 short bed 4x2 that has the bracket you show in the picture as it's designed to work with all models of your truck that came with the factory hitch.

expert reply by: Samuel C

0

Customer Bracket Picture
(click to enlarge)

Answer 1

Since your factory hitch is bolted on and not welded on the correct Torklift hitch is the #TLD1102 and not the part.

view full answer...

Answer 2

For your 2018 Ram 2500 without factory hitch, the Class V hitch I recommend is the Curt Trailer Hitch Receiver - Custom Fit - Class V XD - 2" #C15409. This hitch is a fit for either 8 foot or 6-1/2 foot beds whether you have a factory hitch or…

view full answer...

Answer 3

For your 2008 Dodge Ram 3500 long bed with a Torklift Hitch part #TLD1102-30 the correct set of Torklift Camper Tie Downs are the #TLD2101 for the front and the part #TLR3503 for the rear. I attached an install video for these for you to check out as…

view full answer...

Answer 4

Based on your picture the linkage from the frame to the sway bar would be in the way for Curt trailer hitch #C15409. But not to worry because there is a hitch that accounts for a Hellwig sway bar for a 2003 Dodge Ram 2500 with factory hitch. It is…

view full answer...

Answer 5

I do have an option for you but the only TorkLift Trailer Hitch options available for a 2005 Dodge Ram 3500 require the factory trailer hitch to be in place such as the TorkLift SuperHitch Original Trailer Hitch Receiver part #TLD1102. If this…

view full answer...

Answer 6

The TorkLift SuperHitch Original Trailer Hitch Receiver #TLD1108 will only fit the 2013-2018 Ram 2500 and 3500 models. Your 2007 Dodge Ram 3500 will require the TorkLift SuperHitch Magnum Trailer Hitch Receiver #TLD1102-30 or Original #TLD1102. Both…

view full answer...

Answer 7

We actually had a customer come back with a Hellwig sway bar like what you have and tell us that the Torklift Hitch part #TLD1102 fit with the bar so yes, this will fit and work great on your 2005 Dodge Ram.

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 12

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Will TorkLift SuperHitch TLD1102 Fit 2006 Ram 2500 Short Bed 4x2?

Product Page this Question was Asked From

Continue Researching