Does Torklift SuperHitch for 2005 Dodge Ram fit with Hellwig Sway Bar

Question

Question:

Will the TLD1102 fit on my truck? Picture is passenger side where sway bar is attached

asked by: George M

1

Helpful Expert Reply:

We actually had a customer come back with a Hellwig sway bar like what you have and tell us that the Torklift Hitch part # TLD1102 fit with the bar so yes, this will fit and work great on your 2005 Dodge Ram.

expert reply by: Jameson C

1

click to enlarge

Answer 1

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 2

Since your factory hitch is bolted on and not welded on the correct Torklift hitch is the #TLD1102 and not the part.

view full answer...

Answer 3

Yes, the TorkLift #TLD1102 you were looking at will work with your 2006 Ram 2500 short bed 4x2 that has the bracket you show in the picture as it's designed to work with all models of your truck that came with the factory hitch.

view full answer...

Answer 4

Thank you for the photo, and while there is a 2-1/2 inch trailer hitch receiver that fits your 2021 Ram 5500 cab & chassis, I checked with the manufacturer, and the TorkLift hitch you mentioned will not fit. So for a 2-1/2 inch hitch, you…

view full answer...

Answer 5

I have a solution for you but the Buyers Products Hitch Plate for Pintle Mounting item #3371809030B only fits 1999 and newer Ford F-350's. For your 1986 F-350 Cab and Chassis you will want the Buyers Products Flatbed/Flatbed Dump Hitch…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...

Does Torklift SuperHitch for 2005 Dodge Ram fit with Hellwig Sway Bar

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching