Replacement Trailer Hub that is Pre-Greased for 3,500 lb Trailer Axle
Question:
Hello, I requested assistance before and it was very useful from Noah. But, I have a problem. The rear bearing wont come off because the ring/seal must have welded onto the hub. The outer bearing is reading at 1.78. I am including some photos of the hub but Im not sure if that is enough information. I want to buy the entire hub assembly pre-greased for all four wheels. I was wondering that if I send you my wheel hub assembly at my expense, youd be able to tell me so that I can buy it for your company? Ive already established an account so Ill I need to know if the right wheel hub assembly.
asked by: Jesus R
Expert Reply:
Thank you for all of the info you listed. Based on that I can tell that you have a 3,500 lb trailer axle with a 5 on 4-1/2 inch idler hub so for a replacement you'd want the # AKIHUB-545-35-K which is correct fit and also pre-greased like you are wanting as well.
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Video: etrailer Trailer Idler Hub Assembly Installation
- Video: etrailer Trailer Hubs and Drums - Hub - AKIHUB-545-35-EZ-K Review
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Pre-Greased
- Shop: Trailer Idler Hub Assembly for 2K Axles - 13" to 15" Wheels - 5 on 4-1/2 - Pre-Greased
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Galvanized
- Shop: Square #84 Spindle for 3,500-lb Trailer Axles - 1-1/2" Wide
- Video: Review of etrailer Trailer Hubs and Drums - Hub - AKIHUB-655-35-K
- Shop: Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Search Results: wheel hub assembly
- Shop: Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2
- Q&A: How to Find Correct Replacement Hubs for Shorelandr Boat Trailer
- Q&A: Replacement Trailer Bearings for Shoreland’r Trailer with #84 Spindle
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 6 on 5-1/2 - Pre-Greased
- Q&A: Is There a 5-Lug Idler Hub for Trailer with Two L44649 Bearings
- Q&A: Availability of Dexter 3,500 lb Trailer Axle Hub that is Pre Greased Jamseson, you recommended
- Q&A: Pre-Greased Trailer Hub for 3,500 lb Axle with 5 on 4-1/2 inch Bolt Pattern
- Q&A: Correct Hubs for Boat Trailer with L68149 and L44649 Bearings
- Q&A: Trailer Hubs Based on Spindle Measurements 3,500 Pound Axles
- Search Results: trailer wheel studs
- Video: etrailer Trailer Idler Hub Assembly Review and Installation
- Shop: Trailer Hitch
- Search Results: 44649
- Video: Choosing the Right Trailer Wiring
- Article: Trailer Wiring Diagrams
- Video: Choosing the Right Brake Controller
- Article: Most Popular Wheel Bearings
- Shop: Trailer Wiring
- Search Results: 25580
- Search Results: 68149
- Shop: Fifth Wheel Hitch