Availability of Dexter 3,500 lb Trailer Axle Hub that is Pre Greased Jamseson, you recommended
Question:
Message for Jameson. Jamseson, you recommended the #AKIHUB-545-35K but it doesnt look the same. I thought it was like a star. What holds the assembly in? My spindle is not completely round. It has a watcher lock to hold the large nut in. Is this still your recommendation? Do I have to use my old large nut, watcher, and watcher lock from my old assembly? If you take a look at 84545UC1-EZ it looks like that and the gold watch lock is there.
asked by: Jesus R
Expert Reply:
The star shaped idler hub is how Dexter designs their hubs whereas the etrailer part # AKIHUB-545-35-K uses more of a flange. They are interchangeable though and there would be no issue going from one to the other.
We have this exact style you are looking for with part # 84545UC1-EZ and it comes with a new spindle nut, washer, and cotter pin so it sounds like more what you are looking for. It is also pre-greased.
Products Referenced in This Question
Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- EZ Lube
- Pre-Greased
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Shop: Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Search Results: wheel hub assembly
- Q&A: How To Find Replacement Hub And Drum Assembly For Trailer
- Q&A: Replacement Trailer Hub that is Pre-Greased for 3,500 lb Trailer Axle
- Shop: Dexter Trailer Idler Hub Assembly for 3,500-lb E-Z Lube Axles - 5 on 4-3/4
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Search Results: 44649
- Shop: Tekonsha Prodigy P2 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Q&A: 10k Dexter Replacement Hub for a 8-415
- Video: Choosing the Right Brake Controller
- Search Results: 25580
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Q&A: Trailer Suspension Hanger Kit for Slipper Springs and 38 inch Wheelbase
- Video: Choosing the Right Trailer Wiring
- Article: How to Choose the Right Trailer Hitch Class
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: 68149
- Q&A: How Many Transfer Switches are Needed to Switch from Shore Power to a Genreator, and An Inverter?
- Shop: Grease Seals 10-36 (pair)
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Shop: Fifth Wheel Hitch
- Article: Most Popular Wheel Bearings
- Search Results: dust cap
- Video: Trailer Hitch Installation - 2011 Toyota Yaris
- Q&A: 2022 Toyota Highlander Wiring for a 7-Way Blade Connector
- Shop: Suspension Enhancement