How To Find Replacement Hub And Drum Assembly For Trailer
Question:
Hello, I am replacing to hub assembly to my boat trailer. Your assistance is greatly appreciated.
asked by: Jesus R
Expert Reply:
To find the correct hub and drum assembly for you you will first need to pull one of the hubs off your axle. You will need to remove the inner and outer bearing number to find the part number that you will need. There will be a number sequence on either side showing you what you will need. You may have to clean the bearings off with a hot soapy water mixture to find the numbers. If you're not able to find the bearing numbers you can use a Digital Caliper # PTW80157 and you can measure the inner and outer diameter of both bearings and reach back out to me and I will be able to provide you with the best solution. I will also need to know the weight capacity of your axle. It can be found on the axle sticker.
The Dexter Trailer Idler Hub Assembly # 84545UC1-EZ has an inner bearing # L68149 (1.378 inch inner diameter), and an outer bearing # L44649 (1.063 inch diameter). This hub and drum will work with a 3,500 pound axle. When you find the information I mentioned above please reach back out to me and I will be able to help you out further.
Products Referenced in This Question
4" Carbon Fiber Digital Caliper
- Hand Tools
- Measuring and Layout Tools
- Digital Calipers
- Carbon Fiber
- Performance Tool
more information >
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- EZ Lube
- Pre-Greased
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Search Results: wheel hub assembly
- Q&A: Availability of Dexter 3,500 lb Trailer Axle Hub that is Pre Greased Jamseson, you recommended
- Q&A: Replacement Trailer Hub that is Pre-Greased for 3,500 lb Trailer Axle
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Shop: Dexter Trailer Idler Hub Assembly for 3,500-lb E-Z Lube Axles - 5 on 4-3/4
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Q&A: What is the Difference Between Over 80 inch and Under 80 inch Trailer Tail Lights
- Q&A: Replacement Trailer Axle Recommendation for an EZ Loader Boat Trailer
- Q&A: Converting Boat Trailer From Rollers to Bunk Boards
- Search Results: boat trailer bunks hardware
- Shop: CE Smith Bolster and Swivel Bracket Assemblies - Galvanized Steel - 11" - Qty 4
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Video: Choosing the Right Brake Controller
- Q&A: 10k Dexter Replacement Hub for a 8-415
- Shop: Tekonsha Prodigy P2 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Search Results: 44649
- Video: Choosing the Right Trailer Wiring
- Search Results: 25580
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Trailer Wiring
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Replacement Hub Needed for Lippert 122093 Hub on 5,200 lbs Axle
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Search Results: 68149
- Shop: Fifth Wheel Hitch
- Search Results: dust cap
- Video: Trailer Hitch Installation - 2011 Toyota Yaris
on Trailer Hubs and Drums
