Availability of Trailer Hub with 5 on 4-1/2 inch Bolt Pattern
Question:
i am looking to buy two 5 on 4.5 hub n assembly thank you
asked by: Rick C
0
Expert Reply:
The Easy Grease Trailer Idler Hub Assembly for 3.5K Axles # AKIHUB-5475-35-EZ-K has the 5 on 4-1/2 inch bolt pattern you need and is designed to fit a 3,500 lb axle.
I attached an install video for this for you to check out as well.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-3/4 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-3/4 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Article: Trailer Wiring Diagrams
- Q&A: Recommended Spring Seat for a 2,200 lbs Axle w/ a 1-3/4" Diameter
- Article: Most Popular Wheel Bearings
- Article: Printable Trailer Bolt Hole Pattern Template
- Q&A: Recommended 5 on 4-1/2 Idler Hub for a Dexter D20 Axle
- Q&A: Are Timken Trailer Bearings Made in USA
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: How to Determine the Size of a Trailer Hub Assembly for Replacement
- Q&A: How to Determine if Trailer Axle is Not Aligned and How to Measure to Replace Trailer Axle
- Q&A: Seal With Dimensions to Replace 171255UC
- Q&A: Titan Replacement for Dico Trailer Idler Hub 17214
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs