Is The 12V PWM Filter for RV Backup Cameras Needed With The 2022 Volkswagen Atlas?

Question

Question:

Hi - looking to buy a Voyager backup camera for my Winnebago trailer. Wondering if you know if my tow vehicle requires the PWM filter it’s a 2022 VW Atlas. Thanks!

asked by: Geoff M

0

Expert Reply:

Yes, for your 2022 Volkswagen Atlas you're going to want to use the 12V PWM Filter for RV Backup Camera Systems - Hardwire # VGR64VR.

This is going to ensure that the camera signal strength is steady and strong enough to work operate the Furrion Vision S Wireless RV Backup Camera System w/ Night Vision # FOS43TASF.

attached is an installation video for you to check out as well.

expert reply by: Bryce D

0

Answer 1

Thanks for reaching out, i have a couple things for you to do. Let me explain below: *12V PWM Filter for RV Backup Camera Systems - Hardwire #VGR64VR. The newer GMC vehicles use PWM(Pulse With Modulation) in their electrical systems. The Furrion…

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

The Furrion camera system we have is a closed system and would not be compatible with the in-dash display so you would need to purchase GM's camera system to be able to connect to your display instead of having another monitor. If you do end up…

view full answer...

Answer 6

The newer Chevrolet and GM pickup trucks have a known power deficiency issue with the Furrion Vision S Wireless RV Observation Camera System w/ Side Marker Light Cameras #FCE48TASL-05. There is likely nothing wrong that you did, the problem is the…

view full answer...

Answer 7

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

That's weird, the 7-Way Vehicle Power Adapter for Furrion RV Observation Camera #FR87PR should allow you to use your camper at the same time as that's what it's designed for. If you want to just avoid the adapter all together, I would…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

The issue that you're facing with your Furrion camera System is caused by the PWM GM has switched to with their 7-way wiring and can be solved in two ways: 1. By using the 7-Way Vehicle Power Adapter w/ Power Switch for Furrion RV Observation…

view full answer...

Answer 12

That is pretty low voltage for the Furrion Vision S camera to function so I would suspect that is the problem Kevin. It sounds like you are testing it with the vehicle not running which would make the circuit not have as high of voltage since…

view full answer...