Replacement Parts For Inno Fit Kit TR152 On a 2022 Lexus GX460

Question

Question:

Hello. I am looking for a part for an Inno rack. I have the inno through feet INXS350 and aero crossbars and the custom fit kit that you sell for a 2022 lexus gx460. I recently ran into a low hanging garage, and bent the base plates see picture for the front bar setup. Everything else looks ok. Would you sell these parts separately? Thanks!

asked by: Harry R

1

Helpful Expert Reply:

Those parts are only available with the Fit Kit # INTR152 for your 2022 Lexus GX 460. These will attach to your Feet # INXS350 and Crossbars # INXB138-145.

expert reply by: Bud M

1

Answer 1

The roof rack I highly recommend for your 2020 Lexus GX 460 is from Inno because it will give you the most available crossbar space of any rack that fits your vehicle. Longer crossbars are important because they make it easier to load your…

view full answer...

Answer 2

Thule changed their square bar roof rack crossbars a few years ago with the EVO setup like you mentioned. The difference is now that the bars attach to the feet of the rack via a channel on the bottom of the bars instead of the older style that…

view full answer...

Answer 3

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 4

Thanks for the photo, and so long as you use the Yakima SkyLine Towers, you can switch the rack to your 2016 Lexus GX 460 with the appropriate landing pads that fit it, the Landing Pad 30 for Yakima SkyLine And Control Towers #Y25ZR.

view full answer...

Answer 5

Thank you for the photos! It looks like your 2018 Lexus GX 460 has the flush mounted rails. We have some roof rack options that fit your vehicle and have parts that could potentially fit other SUVs but I would need to know what they are to confirm…

view full answer...

Answer 6

The components you'd need to complete a Rhino Rack roof rack on your 2021 Lexus GX 460 are part numbers #RRVA126B-3, #RRRCH6, and #RRRCP23-BK. This does not require removal of the factory roof rails.

view full answer...

Answer 7

I have a solution for you, but the Rhino-Rack Roof Rack Heavy-Duty Crossbars - Black - 65" #Y01-140B-NT is specifically for Thule or Yakima roof tracks and it will not fit your factory roof tracks. Since your 2014 Lexus GX 460 has the factory…

view full answer...

Answer 8

According to the installation instructions for the Landing Pad 30 for Yakima SkyLine And Control Towers #Y25ZR, you will have to remove the flush mounted side rails to mount the landing pads. I do have another option for you that does not require the…

view full answer...

Answer 9

For carrying a heavier tent like what you have I would recommend going with a three bar roof rack setup that's a fit for your 2014 Lexus GX 460 with flush rails with the Rhino Rack Vortex part numbers #RRVA126B-3, #RRRCH6, and #RRRCP23-BK. This…

view full answer...

Answer 10

I have a great alternative for you. Unfortunately, the Thule AeroBlade Edge Crossbars will not fit your flush rails of your 2019 GX 460. However, if you are looking for a roof rack system that sits higher, I recommend the following roof rack setup: -…

view full answer...

Answer 11

Thanks for the picture! The Landing Pad 30 for Yakima SkyLine And Control Towers item #Y25ZR attach directly to the factory flush rails. You won't have to remove you rails. You will also need the following parts to finish out your roof rack:…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...