Roof Rack Recommendation for 2014 Lexus GX 460 with Flush Rails for Roof Top Tent

Question

Question:

I plan to mount a roof nest falcon pro roof tent wt 180 pounds. I have a 2014 Lexus GX 460 with flush mounted rails only. What cross bar setup do I need?

asked by: Jim P

0

Expert Reply:

For carrying a heavier tent like what you have I would recommend going with a three bar roof rack setup that's a fit for your 2014 Lexus GX 460 with flush rails with the Rhino Rack Vortex part numbers # RRVA126B-3, # RRRCH6, and # RRRCP23-BK. This will give you additional weight capacity to support the tent when travelling and also when the tent has people in it when parked.

expert reply by: Jameson C

0

Answer 1

Since you have a set of Rhino Rack crossbars already you'd need just the feet part #RRRCH4 and then for fit kits part #RRRCP23R-BK and #RRRCP23F-BK for your 2017 Lexus GX 460.

view full answer...

Answer 2

Thanks for the photo, and so long as you use the Yakima SkyLine Towers, you can switch the rack to your 2016 Lexus GX 460 with the appropriate landing pads that fit it, the Landing Pad 30 for Yakima SkyLine And Control Towers #Y25ZR.

view full answer...

Answer 3

Thank you for the photos! It looks like your 2018 Lexus GX 460 has the flush mounted rails. We have some roof rack options that fit your vehicle and have parts that could potentially fit other SUVs but I would need to know what they are to confirm…

view full answer...

Answer 4

I have a solution for you, but the Rhino-Rack Roof Rack Heavy-Duty Crossbars - Black - 65" #Y01-140B-NT is specifically for Thule or Yakima roof tracks and it will not fit your factory roof tracks. Since your 2014 Lexus GX 460 has the factory…

view full answer...

Answer 5

According to the installation instructions for the Landing Pad 30 for Yakima SkyLine And Control Towers #Y25ZR, you will have to remove the flush mounted side rails to mount the landing pads. I do have another option for you that does not require the…

view full answer...

Answer 6

The components you'd need to complete a Rhino Rack roof rack on your 2021 Lexus GX 460 are part numbers #RRVA126B-3, #RRRCH6, and #RRRCP23-BK. This does not require removal of the factory roof rails.

view full answer...

Answer 7

To add a roof rack to your 2017 Lexus GX 460 with flush mounted rails you need the crossbars, mounting feet and a fit kit; here is the list of the parts you'll need for a complete rack: - Inno Aero Crossbars #INXB123-130 - Inno Through Feet for…

view full answer...

Answer 8

The roof rack I highly recommend for your 2020 Lexus GX 460 is from Inno because it will give you the most available crossbar space of any rack that fits your vehicle. Longer crossbars are important because they make it easier to load your…

view full answer...

Answer 9

Those parts are only available with the Fit Kit #INTR152 for your 2022 Lexus GX 460. These will attach to your Feet #INXS350 and Crossbars #INXB138-145.

view full answer...

Answer 10

Thule changed their square bar roof rack crossbars a few years ago with the EVO setup like you mentioned. The difference is now that the bars attach to the feet of the rack via a channel on the bottom of the bars instead of the older style that…

view full answer...

Answer 11

Since the Inno roof rack (parts hyperlinked below) can be mounted at varying locations on the flush rails of your 2018 Lexus GX 460 I recommend going with that system. It has a lower weight capacity at 140 lbs (as opposed to 165 lbs from Yakima) but…

view full answer...

Answer 12

I have a great alternative for you. Unfortunately, the Thule AeroBlade Edge Crossbars will not fit your flush rails of your 2019 GX 460. However, if you are looking for a roof rack system that sits higher, I recommend the following roof rack setup: -…

view full answer...

Roof Rack Recommendation for 2014 Lexus GX 460 with Flush Rails for Roof Top Tent

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching