How To Find Correct Replacement Door Hinge for Enclosed Trailer

Question

Question:

I have a 2006 Carry-on 6x12 enclosed trailer. Is there a companies that has similar parts? Door hinges?

asked by: Bart J

0

Expert Reply:

We do offer door hinges for enclosed trailers, in order to choose the correct one you'll need to note the type and measure its length. The T-Strap Hinge for Enclosed Trailers part # PLR3408 for example is a t-strap style hinge which measures approximately 9-5/8.

I have attached for you below a full list of our hinge options from various manufactures.

expert reply by: Conner L

0

Answer 1

I went out to our warehouse and measured the T-Strap Hinge for Side and Rear Trailer Doors #PLR3408. The distance from the center of the mounting hole to the center of the closest strap hole is 3 inches. The distance from the center of the 1/2 inch…

view full answer...

Answer 2

It will indeed work; I just checked with Lippert for you and was able to verify the correct toggle switch for your Lippert Power Stance Electric Trailer Jack #LC69VR (which is the 813748), is the following: - Replacement Extend/Retract Switch for…

view full answer...

Answer 3

The smaller section of the Z-Rail for Enclosed Trailer #362417-955 is approximately 3/4" tall, while the larger section is approximately 1-1/4" tall.

view full answer...

Answer 4

We do offer a hinge that may work well for you. I recommend part #PLR1904-Z. This is a barn door hinge for dump trucks and is made of 1/4 inch steel. This has a smooth surface that is designed for welding. I have also attached a photo of this hinge…

view full answer...

Answer 5

The inner diameter of Solera roller tubes like the Replacement 20' Roller Tube for Solera RV Awnings #LC33FR is 3", that being said Solera and other branded awnings are not compatible with each other. We typically have a lot of people…

view full answer...

Answer 6

I've checked with Lippert, who tells me that you'd need to measure the length of the actual tube itself, rather than the center arm to center arm length. Given the length you measured, the #LC33FR you'd looked at would be the likely…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

I would be happy to help you find the correct replacement door hinge for your 2000 Sooner Royale Horse Trailer, but I was unable to find any dimensions or information about the 03139010 hinge you mentioned. Based on the picture you provided it looks…

view full answer...

Answer 9

To create barn doors out of your ramp door, you will need hinges and a latch. I suggest a latch/lock system like the Universal Cam-Door Lock for Enclosed Trailers - 1" Keeper, #383200. This will use a 3/4 inch diameter pipe that you'll have…

view full answer...

Answer 10

Yes, the H-Channel for Enclosed Trailer #36281-955 can be used for the side door frame on your enclosed trailer. It is specifically designed for building cabinets and doors on a trailer. There is also the 1/16" Thick Tube Trim for Enclosed…

view full answer...

How To Find Correct Replacement Door Hinge for Enclosed Trailer

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching