Recommended Replacement Hinges For Barn Doors On Dump Truck
Question:
I have an all Pro 5-6 ton dual cyl dump trailer with barn doors in rear. I need the hinges that the doors swing on. They are welded to the door and attached by a bolt to the trailer, Dealer keeps jerking me around. Do you have anything like this. Thanks
asked by: Jeff B
Expert Reply:
We do offer a hinge that may work well for you. I recommend part # PLR1904-Z. This is a barn door hinge for dump trucks and is made of 1/4 inch steel. This has a smooth surface that is designed for welding. I have also attached a photo of this hinge you can take a look at.
I have also attached a photo of the four strap hinges that might work for you. As you can see, these have holes drilled in them so they can be bolted in place for both the door and the trailer. If you choose a hinge that has a zinc coating, you will need to use extreme caution when welding in place because of poisonous fumes.
The hinges are part # 2008-8, part # 2212, and part # 2512.
Products Referenced in This Question
Square Corner Hinge with Reverse Bracket - 12" Long - 270 Degree Rotation - Zinc Plated
- Trailer Door Hinges
- Strap Hinge
- Corner Hinge
- Reverse Bracket
- Steel
- 12 Inch Long
- 2 Inch Wide
- Bolt-On - Pre-Drilled Holes
- Polar Hardware
more information >
T-Strap Hinge for Enclosed Trailers - 12" Long - 180 Degree Rotation - Zinc Plated Steel
- Trailer Door Hinges
- Strap Hinge
- T-Strap
- Steel
- 12 Inch Long
- 2 Inch Wide
- Bolt-On - Pre-Drilled Holes
- Polar Hardware
more information >
Dump Door Hinge for Dump Trailers - Steel - Qty 1
- Trailer Door Hinges
- Dump Door Hinge
- Greasable Pin
- Steel
- Weld-On
- Polar Hardware
more information >
Product Page this Question was Asked From
T-Strap Hinge w/ Wide Bracket for Enclosed Trailers - 8" Long - 180 Degree - Zinc Plated Steel
- Trailer Door Hinges
- Strap Hinge
- Steel
- 8 Inch Long
- Bolt-On - Pre-Drilled Holes
- Polar Hardware
more information >
Continue Researching
- Q&A: How to Determine Hanger Spacing on 5,200 lb Tandem Axle Trailer
- Shop: Dump Door Hinge for Dump Trailers - Steel - Qty 1
- Shop: Replacement Velcro Strip for Access TonnoSport and Vanish Covers - 1" Wide x 17' Long
- Video: Hopkins 7 Way Molded Trailer Wire Connector Installation
- Shop: Replacement TruXedo TruXport Shur-Bond Hook-And-Loop Fastener Strips for 6-1/2' Beds - Qty 2
- Shop: Replacement Velcro Strip for Extang Express Tonneau Cover 8' Long x 1" Wide - Qty 1
- Shop: 7-Way Molded Trailer Wire Connector, 4' Long
- Q&A: Hinge Recommendation for Converting Gate of Dump Trailer to Barn Doors
- Video: Polar Hardware Enclosed Trailer Parts - Doors - PLR1904-Z Review
- Q&A: How to Convert Dexter 10k Drum Brakes to Electric Over Hydraulic Disc
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Shop: Replacement TruXedo Shur-Bond Velcro Brand Fastener for 6-1/2' Beds -1-5/16" Wide
- Shop: Timbren Axle-Less Trailer Suspension - Heavy Duty - Long Spindle w/ 4" Drop - 4 Bolt - 2K
- Q&A: Door Hinge Bracket with 4 Inch Width
- Q&A: Recommended Handle Latch Kit for Barn Door on Dump Trailer
- Search Results: door latch
- Search Results: dump trailer door
- Search Results: gate hinge
- Search Results: steering axle
- Search Results: etrack
- Search Results: etrack ring
- Video: Choosing the Right Brake Controller
- Article: Trailer Wiring Diagrams
- Search Results: hitch
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Shop: Trailer Hitch
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Shop: Trailer Wiring
- Article: Trailer Tire Sizing
- Article: How to Choose the Right Trailer Hitch Class