How Long Does It Take to Install Roadmaster Crossbar-Style Base Plate Kit on 2009 Chevy HHR

Question

Question:

Could you please tell me what the estimated installation time for this base plate is? I live in Ohio, so it would need to be done locally. Thank you!

asked by: Mark K

1

Helpful Expert Reply:

The Roadmaster Crossbar-Style Base Plate Kit part # 3141-1 which is a fit for a 2009 Chevrolet HHR will take around 4-6 hours for installation based on experience. I have attached for you below the installation instructions if you would like to review them. If you need help with installation, you can use our install locater tool to get the base plate kit installed locally. The link for this is located on the product page under the videos tab.

expert reply by: Conner L

1

Answer 1

I pulled up the owners manual of a 2009/2010 Chevy HHR and the manual and automatic transmission versions of the vehicle can be flat towed with a tow bar like the Roadmaster part #RM-520 that you referenced. The first thing you'll need is a base…

view full answer...

Answer 2

A diode kit like the part #RM-15267 can basically be installed on any vehicle and would be a great option for your 2008 Subaru Outback. This will splice into your taillight wiring to allow your tow vehicle to control the taillight assemblies of the…

view full answer...

Answer 3

I can help you get the parts you need to flat tow the 2007 Chevy HHR with the Roadmaster Sterling All Terrain tow bar part #RM-576. I recommend the Roadmaster Base Plate kit part #3141-1 to fit the Sterling Tow Bar. For the wiring I recommend Hopkins…

view full answer...

Answer 4

The only difference between the Roadmaster Direct-Connect Base Plate Kits like part #RM-523179-5 and the Roadmaster Crossbar-Style Base Plate Kits like part #RM-523179-4 are the removable arms. The Direct-Connect style means you can attach a tow bar…

view full answer...

Answer 5

If you are installing just the Firestone Ride-Rite kit, #F2400, and not also adding an on-board air compressor such as #F2158, then I would estimate that it should take about 2 hours to install the kit. That is for someone with some mechanical…

view full answer...

Answer 6

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 7

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 8

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Answer 9

Your trailer looks awesome! The Road armor equalizers #LC696740 and Equa-Flex Cushioned Equalizers #LC279687 are both pretty similar in performance even though the Road Armor has two dampers. The main difference is the size of the equalizers. The…

view full answer...

Answer 10

The best option we offer for your dump trailer is the Erickson Mesh Tarp and Truck Bed Cover part #EM57059 which measures 12' wide x 16' long. It's not the exact dimensions you wanted but it will still cover most of the area you need it…

view full answer...

Answer 11

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 12

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...