Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"
(137 reviews)
Price: $185.56
In Stock
Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"
Item # C66KR
Retail:$289.95
Our Price: $185.56
You Save: $104.39
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (137)
- Q & A (0)
- Photos
CURT Trailer Hitch - C66KR
- Class II
- 1-1/4 Inch Hitch
- 3500 lbs GTW
- Concealed Cross Tube
- CURT
- 350 lbs TW
- Custom Fit Hitch
Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.
Features:
- Custom fit is designed specifically for your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Gloss black powder coat finish over protective base coat offers superior rust resistance
- Sturdy, square-tube design
- Drawbar, pin and clip sold separately
- Hitch assembled in the USA
- Mounting hardware may be imported
Specs:
- Receiver opening: 1-1/4" x 1-1/4"
- Rating: Class II
- Maximum gross trailer weight: 3,500 lbs
- Maximum tongue weight: 350 lbs
- Limited lifetime warranty
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
12200 Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"
Installation Details
This Product Fits The Following Vehicles
- 2019 - 2024 Toyota RAV4
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- etrailer mistake
Customer Reviews
Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" - C66KR
Average Customer Rating: 4.7 out of 5 stars (137 Customer Reviews)
Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.by: William10/20/2023
Second etrailer order this year that’s been loose and damaged due to ridiculously insufficient packaging. The 50lb unsecured hitch was in an oversized box with ZERO dunnage or means to prevent the hitch from flopping around in the box. The box was completely open, and every side of the box was ripped or gouged. I suspect the driver put the hitch back in the box. Quite frankly, thinking this packaging is ok sends a very clear middle finger to the customer. Time to move on from etrailer.
by: Sherry09/05/2022
2022 Toyota RAV4
After reviewing the installation video, my husband and I (we are both seniors) were able to install this item fairly easily.
Sherry
9/6/2023
I’ve been using this for a year to carry my bike rack. Still solid and looking good!
Mike L.
10/27/2023
@Sherry That's great! We're happy to hear your Curt # C66KR hitch is still working well for you!
by: Chett03/21/2024
The hitch was poorly package and as a result it was bent when it arrived. Also the wrong hardware was sent and it took a whole week for etrailer to get the correct hardware to me. That is unacceptable in my opinion.
Katrina D.
3/24/2024
Oh I am sorry about that. So, it looks like our customer service department is sending out the correct hardware in it's place. Once you receive the correct hardware, I would love to hear your updated feedback.
by: Patti 01/11/2023
2022 Toyota RAV4
The hitch fit my RAV4 and works as advertised, but my son had a little more trouble with the installation than expected. Fortunately, a video helped him get the job done, and he was able to add his bike rack to the hitch. It does what he needed, and the price was reasonable.
Patti
1/12/2024
Hitch is still great for mounting a bike rack. We are very satisfied with the product.
by: Chuck C05/05/2023
I was very surprised at how professionally manufactured this trailer hitch was for the price. I have never installed a trailer hitch before and it only took me about 30 minutes. I did use a floor jack to help me since I was doing it by myself you do not need to drop the muffler, if you’re worried about scratching the pipes, just put some tape on them but the trailer hitch will fit. I highly recommend etrailer because their product is very good and very reasonable.
by: Joe07/19/2023
2019 Toyota RAV4
Packaging a bit beat up when it arrived, however, no damage to the hitch and all bits and pieces were there. Approximately one hour to unpack, set up and do solo install. Definitely would have been easier to install with a second set of arms (muscle).
by: Mark03/08/2024
2024 Ford Edge
I put the Class II hitch on my 2024Rav4 Hybrid. I didn't drop the muffler but I see why it makes it easier. I wiggled things in place, hydraulic jack to finalized position. Bolted in real clean. Wiring is next. My last product, class III on a ford Edge had no issues over 5 years of time.
by: Ken02/11/2024
installed just like the video. no problems. Also no problems developed with foot kick feature as was warned as possible.
If I were to do over again I would get the Cat. III hitch simply based on what is available for the 2" receiver vs. the 1 1/4".
by: Don 04/10/2024
2024 Toyota RAV4
Arrived with damage to box, but hitch receiver was undamaged. Receiver (the part you see after installation) was securely wrapped with bubble wrap and tape. 30 minute install by my mechanic on my Rav4.
by: John K04/20/2024
I read of other purchasers finding the hitch tearing large holes in the standard weight cardboard box. My package also was torn at both ends and the mounting bolts were missing, apparently having fallen out of the box through the large holes. Packaging seemed reputation destroyingly inadequate. My last purchase
by: Dane 01/06/2024
Toyota RAV4
Had this a year. Easy to install on my RAV4 Prime and to take the bike rack on and off the hitch. Would definitely recommend it.
by: Jim03/09/2024
The hitch was well made and fit perfectly on the RAV4. We did the installation ourselves which took about an hour. We made the installation a little harder due to not jacking up the vehicle, it was a bit cramped
by: Kevin01/08/2024
2021 Toyota RAV4
The etrailer site was easy to use. I especially appreciate their informative videos. My trailer hitch fit and has been great.
by: Randy 10/26/2023
2023 Ford Transit Connect
The Curt trailer hitch receiver arrived on the day it was supposed to. All the parts and instructions included. It looks well made and fit the vehicle with a minimal fuss. I had the unit installed in about an hour. Your installation video clearly explained the process and was very helpful. The only issue was the box was roughed up in transit and arrived with part of the square receiver tube sticking out of the box. A small amount of the powder coat finish was knocked off. Fortunately that will be out of sight under the vehicle.
by: Kenneth04/09/2024
I should have believed the reviews. Would have thought you did and would have done better. The box had so many holes tears and repairs yet the product was still hanging out of box getting scratched on my concrete porch. Let’s hope it’s not bent and installs ok. You could spend a couple dollars on the spray foam in bags that would keep product in the box and from flailing around. I’m sure the delivery people get so frustrated that they don’t care either because you don’t care. It doesn’t have to be an awkward package. Do better!
Jenny N.
4/11/2024
I am sorry to hear that the hitch arrived this way. I will have our Customer Service team reach out to you. We recommend touching up the hitch with a rust resistant pain like Rustoleum. We can send out a paint kit to you.
by: Devyn02/14/2024
2020 Toyota RAV4
Really great product, easy install. 4 stars because of the packaging. They could have used foam or something to pack it in. I received a damaged box, product was fine. Had a few scratches and dings from transit but fit just right. I recommend having another person there to help. Can be heavy for one person. Clear instructions.
by: RJS09/15/2022
2020 Toyota RAV4
The product is great. very sturdy. Will use this mainly for my bike rack. Installation was the challenging one. Gave this a 4 rating due to the installation document not really clear about the muffler that needs to be pulled side to side to slowly insert the hitch. Had to call customer support and good thing a video was shared. That was all I need. Customer support was an easy 5 rating for sure!
by: NRod04/14/2024
2024 Toyota RAV4
It went right on. I did get help from my son. We did lower the exhaust but that was easy, Nothingbneeded to be cut or modified. The hardest part was removing the stickers covering the bolt holes since I had just trimmed my fingernails. Itvwould have nicer if Toyota had the same thread for all 4 bolts.the smaller diameter bolts go forward.
The packaging takes a beating during shipping but nothing was lost or damaged.
by: David 11/21/2023
The hitch works great. I had difficulty getting the muffler out if the way myself so I took it to a shop for the installation.
by: GAB05/10/2022
Toyota RAV4
Delivered quickly, seems to have installed cleanly. Works well so far as receiver for bike rack on our RAV4.
Gab
5/10/2023
Product has continued to work as promised - no issues.
by: Michael05/17/2023
The hitch is great BUT the packaging was trashed during shipment. The packaging was sub-par and the hitch was sticking out of the cardboard in 3 places.
Jenny N.
5/22/2023
To be honest it is not uncommon for this to happen despite our best efforts. I will have our Customer Service team reach out to make sure the hitch was not damaged.
by: Richard 12/05/2023
it fit as it was supposed to, as a retired mechanic i appreciated the fact that i didn't have to make any modifications, everything was there, i had slide in from previous car that i had to redrill ,which i could have alleviated by just ordering it also , it looks nice , hardly noticeable, if it does not rust with winter salt ill be really happy with it.
by: Ted 03/17/2024
Everything fit perfect
by: Wesley 04/13/2024
Great quality, easy install
25
137
Show More Reviews
See what our Experts say about this CURT Trailer Hitch
- Can Curt Hitch C66KR be Installed to Avoid Interference With Liftgate SensorsIn short, no, there isn't a way to 100 percent guarantee the hands-free liftgate on your 2021 Toyota RAV4 will function exactly the same after installing any trailer hitch, including the Curt Trailer Hitch Receiver # C66KR. There isn't a different installation method for the # C66KR which negates the possibility, but I will say that I haven't heard of this happening with this hitch. What happens far more often than not when there is this warning is that you just have to kick your foot...
view full answer... - Trailer Hitch For A 2024 RAV4 Hybrid And Recommended InstallerHello Vron. For a class 2 hitch for your 2024 Toyota RAV4 Hybrid I recommend the Curt Hitch # C66KR. This will be a very easy bolt-on install. We do have several installers not too far away from you. The link below will show you the full list of installers in your area along with their contact info. Bauers Custom Hitches in Hopkins is one that I recommend if you are willing to drive about 20 miles. You also have Burnsville Trailer Hitch in Burnsville and they also do this kind of work.
view full answer... - Best Ground Clearance Trailer Hitch that Fits 2021 Toyota RAV4 PrimeYes the hitches from the 2021 Toyota Rav4 Prime are the same as the 2022 Rav4 Prime. The Curt hitch part # C66KR fits right up to the very bottom of the rear bumper so it would have the best ground clearance. I attached an install video for more info for you to check out as well.
view full answer... - Recommended Class II Hitch w/ the Best Ground Clearance for a 2021 Toyota RAV4The Curt Trailer Hitch item # C66KR is going to have the best ground clearance. When we installed this hitch on a 2021 RAV-4 the bottom of the receiver was 10-3/4" above the ground. The Draw-Tite hitch sat about 1/2" lower. The Curt Hitch item # C66KR is custom fit and bolts to your RAV-4 with included hardware. It is confirmed to fit the hybrid model as well. This hitch has a 3,500 lbs towing capacity and a 350 lbs maximum tongue weight.
view full answer... - Will Curt Class II Trailer Hitch Receiver C66KR Stick Out Past Bumper On 2019 Toyota RAV4When we had a chance to install the Curt Trailer Hitch Receiver # C66KR on a 2020 Toyota RAV4 we found that the trailer hitch receiver will be roughly 2" recessed from the most outward part of the rear bumper. I am not sure exactly which part of the bumper the receiver cannot stick past, since as you can see in the included picture the hitch will stick past the bottom lip, but it will not protrude the main portion of the bumper of your 2019 Toyota RAV4. I included a video of the # C66KR...
view full answer...
- Difference Between Installation Difficulty of Curt and Draw-Tite Class II Hitch for 2021 Toyota RAV4After looking through the installation instruction for the Curt # C66KR and Draw-Tite # 36675 Class II hitches for the 2021 RAV4, there really is no discernable difference in the installation procedure that would justify the difference in install difficulty rating. In my opinion, neither would be any more difficult to install than the other. Since both hitches install in the same manner and have the same capacity, you could choose the least expensive option, and not feel like you've sacrificed...
view full answer... - Which Class II Hitch for 2022 Toyota RAV4 Has Best Ground ClearanceIt's not by much but the Draw Tite Class II hitch part # 36675 has the better ground clearance compared to the Curt # C66KR that fits your 2022 Toyota Rav4. The Draw Tite has 12-1/4 inches from top of hitch opening to ground whereas the Curt has 12 inche.
view full answer... - Can I Put A Class II Hitch Receiver On MY 2021 Toyota RAV4Yes, you will have two choices in Class II hitch receivers, and they fit all the models of your 2021 Toyota RAV4.. They are the Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4", part # C66KR, and the Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4", part # 36675. Each of these hitch receivers do have a maximum tongue weight of 350 lbs and a maximum gross trailer weight of 3,500 lbs. The Draw-Tite hitch receiver measures, from the ground to the top of the hitch...
view full answer... - What is the Difference Between the Ground Clearance of the Curt # C66KR and the Draw-Tite # 36675?If you are looking at the Curt Hitch # C66KR and the Draw-Tite Hitch # 36675, both of these 1-1/4 inch hitches have ground clearances of 12 inches. Ground clearance is measured from the ground to the bottom of the upper part of the receiver tube opening. With these two options, I recommend the Draw-Tite hitch because it is the more economic option. I went ahead and attached videos of both of these hitches to walk you through the installation process on your 2021 RAV4.
view full answer... - What Hitch Will Fit My 2021 Toyota Rav4 Prime?After reaching out to Curt on your behalf, I've been told that both the Curt # C66KR and the # C13416 are expected to fit all sub-models. I've included an installation video on a 2020 Toyota Rav4 that should help you with the install.
view full answer... - Installation Video For The Curt Class II 1-1/4 inch Hitch Receiver On A 2019 Toyota Rav4I have attached a video of an extremely similar hitch to the Curt Class II 1-1/4 Hitch Receiver # C66KR. Its the Curt Class III 2" Hitch Receiver and its being installed on a 2019 Toyota Rav4. It has the same mounting points and will require the same steps to get it installed. The only difference is that it's a Class III 2" instead of a Class II 1-1/4" hitch receiver. Rob does a great job explaining so you'll be confident doing this at home!
view full answer... - What Trailer Hitch Will Work With My Yakima Doubledown Bike Rack On My 2021 Toyota RAV4When installing a hitch on your 2021 Toyota RAV4 that will work with your 1-1/4 inch Yakima Doubledown rack I recommend The Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4 inch # C66KR.The hitch has a concealed cross tube, it has a gross towing weight up to 3,500 pounds and a tongue weight up to 350 pounds. Check you manual to make sure what the recommended towing capacity is for your vehicle. I will attach an install video link below.
view full answer... - Trailer Hitch With 1-1/4 Inch Receiver For 2021 Toyota RAV4There is a trailer hitch that fits your 2021 Toyota RAV4 with a 1-1/4 inch receiver so you can use your bike rack with a 1-1/4 inch shank, and the best option for this is a hitch from Draw-Tite: - Draw-Tite Trailer Hitch Receiver # 36675 The reason I like this hitch the most for your '21 RAV4 is because it has better ground clearance than the other Class II hitch that fits your vehicle, the Curt # C66KR, which is important when using the hitch for a bike rack. The Curt also requires the...
view full answer... - 1-1/4 inch Trailer Hitch that Fits 2021 Toyota RAV4 Prime PHEVThe Draw Tite hitch part # DT82QR does fit your 2021 Toyota RAV4 Prime PHEV but it is the wrong size as it is a 2 inch hitch. Instead you'd want the Curt hitch part # C66KR which also fits your vehicle but is the correct 1-1/4 inch hitch size.
view full answer...
- Which Hitch for 2024 Toyota RAV4 has Best Ground ClearanceThe hitch with the best ground clearance that fits your 2024 Toyota RAV4 is the Curt part # C66KR but this is a 1-1/4 inch hitch. Only the hitch opening hangs below the rear bumper which allows for the better ground clearance. If you instead wanted the more popular 2 inch hitch size you would want the part # e23ZR. The only reason this hitch has slightly less ground clearance is because it is the larger hitch size.
view full answer... - What Tools Do I Need To Be Able To Install The Curt Receiver On My 2019 Toyota RAV4? For the installation of the Curt Trailer Hitch Receiver # C66KR on your 2019 Toyota RAV4 Curt requires the following tools. 17mm Socket 19mm Socket 8" Ratchet Extension Ratchet Wrench Torque Wrench rated for at least 100 ft-lbs # ALL944001 19mm Torque Adapter A Nylon Tube Brush # 814092 is recommended to clean out the weld nuts of any excess debris and dirt that are in the threads. I have linked the installation video we have as well as the manufacturer instructions below for you to...
view full answer... - Does The Hitch For The 2024 Toyota RAV4 Also Fit The 2024 RAV4 Hybrid?Yes, the hitches for the 2024 Toyota RAV4 will also fit the 2024 RAV4 Hybrid model. We have confirmed this with the manufacturer, as well as with several of our customers who have successfully installed hitches on the hybrid model. We have a class 3 hitch available with a 2" receiver part # e23ZR, or we have the class 2 option # C66KR which uses the smaller 1-1/4" receiver.
view full answer... - Will Installing Hitch on 2022 Toyota RAV4 Hybrid Disable the Power LiftgateThe installation of a hitch like the # C66KR will not interfere with the power liftgate on your 2022 Toyota RAV4 Hybrid. The only thing it may impact is the hands-free sensor. So your key fob and the button will continue to work as intended. However, I would recommend installing a Class III hitch like the etrailer Trailer Hitch Receiver # e23ZR over the Class II hitch. The # e23ZR has a 2" receiver which will give you a lot more options for accessories such as bike racks. It also comes...
view full answer... - Trailer Hitch for 2020 Toyota RAV4 TRD with Best Ground ClearanceDo you have a 2020 Rav4 or a 2021? We don't have hitch fits for the 2021 models at this time.
view full answer...
- Will Curt Class II Hitch Fit 2022 Toyota RAV4 HybridYes, the Curt Trailer Hitch Receiver # C66KR is compatible with the hybrid version of your 2022 Toyota RAV4. If you plan on using this hitch for a bike rack I recommend checking out the Kuat Beta # B202-114 because it's easy to use, can handle 40 lb bikes, and it only weighs in at a mere 12.6 lbs. Attached is a review video for you to check out.
view full answer... - Class III Vs Class II Trailer Hitch For A 2021 Toyota RAV4 HybridThe main reason you should use a class III hitch vs a class II hitch is that a class III hitch like the Curt Trailer Hitch Receiver # C13416 has a 2" x 2" receiver opening which is the most common opening used and manufactured, to carry hitch mounted accessories like the Swagman Trailhead 4-Bike Rack # S63381. Also, class II hitches are not made to be used with a weight distribution system, so if you wanted to use a WDS you'd have to install a class III hitch. That being said, there isn't...
view full answer... - Trailer Hitch Clearance For 2022 Toyota RAV4 HybridYes, per Curt their Trailer Hitch Receiver part number # C66KR is compatible with the hybrid version of your 2022 Toyota RAV4 and the Draw-Tite Trailer Hitch Receiver, # 36675 has been confirmed as well. Each of these options are Class II hitches with a 1-1/4" receiver. Each have equal ratings of 350 lb. tongue weight and 3,500 lb. max trailer weight for towing. They are both of similar build design and set with about, or close to, 12" of ground clearance. Once installed the bottom of...
view full answer... - Is There a Class 2 hitch for 2020 RAV4 HybridYou can go either way you wish there. You could use a Class II like the Curt # C66KR which will be compatible with your bike rack or you could go with the more common Class III hitch part # C13416 and then use a hitch adapter like # HT02. If the only hitch accessory you'll ever use is that particular bike rack, I'd just go with the Class II. However, if you might use other hitch accessories like a Curt # C18151 cargo carrying rack or if you might upgrade your bike rack in the future, you...
view full answer... - Recommended 1-1/4 Hitch and Draw Bar for a 2022 Toyota RAV4A draw-bar is the same thing as a ball mount. The Curt Trailer Hitch Receiver item # C66KR has a 1-1/4" receiver. If you are pulling a trailer you will need the Draw-Tite Drawbar item # 3593 and then for hitch balls item # 19258 for a 2 inch ball or item # 19256 for a 1-7/8 inch ball. If you are just dragging out old logs, then I recommend using the Curt Class II Euro Style Drawbar with 2" Ball - 3-1/4" Drop - 3,500 lbs item # C45582 because it will be easier to wrap a tow hook or chain...
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Edited by:
Lindsey S
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Chris R
Updated by:
Wilson B
Video by:
Jonathan Y
Video by:
Ryan G
Test Fit:
David F
Test Fit:
Aidan B
Test Fit:
John A
Written by:
Kristina F
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jenny N.
10/26/2023
I can see that the hitch had a rough journey. I will have our Customer Service team reach out to assist you.