Replacement Gearbox For Lippert Ground Control 2.0 Leveling System

Question

Question:

Are the gears internal to the LC241844 available for purchase?

asked by: Steve

0

Expert Reply:

Yes, we do have what you're looking for!

For your Replacement Heavy-Duty Landing Gear Jack Leg for Ground Control 2.0 # LC241844, you can use the:

-Replacement Aluminum Gearbox for Stromberg Carlson Landing Gear # LG-179015.

If you are needing anything else, feel free to reach out and I'd be happy to help.

expert reply by: Bryce D

0

Answer 1

The correct Thule Hideaway awning for attaching to the side of a camper like your R-Pod 172 would be the part #TH490018 as this is the direct mount version that you'd use for the side of a camper like yours. There isn't anything you'd…

view full answer...

Answer 2

The Lippert 2.0 system is not compatible with the motors on the 3.0 system. The 3.0 system uses electric motors that utilize the hall effect where the 2.0 system does not. This is a completely different design which makes the motor and legs…

view full answer...

Answer 3

Sounds like the panic stop you had to do with your Ground Control 2.0 possibly caused an internal bug on your system. We've spoken with Lippert in the past about resetting the GC systems and they have told us that you need to cut the power supply…

view full answer...

Answer 4

I believe you're asking if you can upgrade from your Lippert Ground Control 2.0 to the Ground Control 3.0, and yes you an technically, however since none of the parts carry over you'd need full system replacement. If you're interested in…

view full answer...

Answer 5

Yes, you will be able to use the Replacement Converter Section for Progressive Dynamics 4500 Series RV Power Control Center - 60 Amp #PD4560CSV with your PD4560K12L. This replaces the converter charger section in 4500 series power control centers.

view full answer...

Answer 6

We do indeed offer the replacement leg you mentioned as part #LC241844.

view full answer...

Answer 7

On the Lippert Ground Control 3.0 #LC358590 the error you are receiving indicates either a problem at the left front jack, a hall signal issue (open ground/short, or other malfunction) or an unexpected high amperage current stall (meaning the battery…

view full answer...

Answer 8

It sounds like the landing gear leg in question may have been over extended. If the leg seems to be slipping and has trouble extending (but you can still hear the motor turning) then this is likely what happened and it probably damaged/stripped the…

view full answer...

Answer 9

You'll need a new jack leg based on what you described. For a replacement you'd want the part #LC241845 for the driver side or part #LC241846 for the lead leg that is normally on the passenger side.

view full answer...

Answer 10

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 11

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 12

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...