How to Clear the LR Jack Code on a Lippert Ground Control 3.0 Stabilizer Jack
Question:
How does one clear the LR Jack code?
asked by: Joe L
Expert Reply:
On the Lippert Ground Control 3.0 # LC358590 the error you are receiving indicates either a problem at the left front jack, a hall signal issue (open ground/short, or other malfunction) or an unexpected high amperage current stall (meaning the battery stopped providing power for some reason).
To clear the error you can either fix what is causing the error such as a loose or damaged wiring harness, or follow this method:
Extend all jacks at least 6 inches. Then press and hold the retract button until the jacks begin retracting. All of the jacks should fully retract and clear the error.
If you have a 6-point system the middle jacks only operate in error mode. To engage the middle jacks you would need to press the left and right buttons simultaneously.
Check the manual for the system because some things have to be done in a certain order for the system to operate correctly. That should prevent future errors (unless there is an actual electrical or mechanical problem).
The LR jack code means your left rear jack leg is not able to be controlled by the computer of the Ground Control 3.0.
It is important that once the error code has been resolved, the user of the unit must manually
retract all jacks completely before exiting the error code. If this step is not completed, the LCD will
prompt the user to complete this step as follows:
Sample Error Codes
“ERROR”
“LR JACK”
“MANUALLY RETRACT”
“ALL JACKS”
“PRESS ENTER”
Product Page this Question was Asked From
Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System w Touchpad - 4-Point Set
- Camper Jacks
- Fifth Wheel Camper
- Leveling Jacks
- Stabilizer Jacks
- Steel
- 10001 lbs or More
- Electric Jack
- 36 Inch Lift
- Bolt-On
- 4 Jacks
- Lippert
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Fifth Wheel Hitch
- Shop: Replacement Hall Effect Motor for Lippert Components Ground Control 3.0 Leveling System
- Shop: Lippert Polarity Reversing Solenoid by Trombetta for Hydraulic Power Units
- Shop: Replacement 24-1/2" Left Rear Leg - Lippert Ground Control 3.0 Electric Leveling System
- Shop: Replacement 22-1/2" Right Rear Leg for Lippert Ground Control 3.0 Electric Leveling System
- Shop: Demco Autoslide 5th Wheel Hitch w/ Slider - Single Jaw - Chevrolet/GMC Prep Package - 18K
- Q&A: Rear Leg Will Not Retract on Lippert Ground Control 3.0 Leveling System
- Video: Lippert Ground Control Replacement Leg Review
- Q&A: Rear Leg Dimensions Of Lippert Ground Control 3.0 Electric Leveling System
- Shop: B&W Companion OEM 5th Wheel Hitch for Chevy/GMC Towing Prep Package - Dual Jaw - 20,000 lbs
- Q&A: How to Clear Error Code on Lippert Ground Control Leveling System
- Shop: RV Jack Pads
- Search Results: demco autoslide
- Video: Demco Hijacker Autoslide 5th Wheel Trailer Hitch Installation - 2021 GMC Sierra 2500
- Search Results: truck bed cover
- Shop: B&W Companion OEM 5th Wheel Hitch w/ Slider for Chevy/GMC Towing Prep Package - Dual Jaw - 20K
- Q&A: Troubleshooting A Lippert Ground Control 3.0 Leveling System That Is Giving A RR/LR Error Code
- Video: Review of SnapPad RV Jack Pads - SnapPad XTRA Jack Pads - SP54FR4
- Video: SnapPad Jack Stand Pads Installation - 2015 Winnebago Vista Motorhome
- Video: Flush King RV Sewer - Hose Adapters and Fittings - F02-4350 Review
- Video: Flush King RV Holding Tanks Reverse Flush Valve Review
- Q&A: Left Rear Jack Error Code On a Lippert Ground Control 3.0 Automatic Leveling System
- Q&A: Troubleshooting an "RR" Code on a Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System
- Q&A: Troubleshooting External Sensor Error on Lippert Leveling System
- Video: B and W Companion OEM 5th Wheel Hitch Installation - 2019 Ford F-350 Super Duty
- Shop: Bumpers
- Shop: Performance Chip Tuners
- Shop: Tool Box
- Shop: Vehicle Cargo Control
- Search Results: curt crosswing