Availability of Lippert # LC241844 Replacement Landing Gear Leg

Question

Question:

Do you have a replacement electric leveling leg for an LCI Part # 241844 17inch HD rear jack on a six jack leveling system Thanks

asked by: Gord W

1

Helpful Expert Reply:

We do indeed offer the replacement leg you mentioned as part # LC241844.

expert reply by: Mike L

1

Answer 1

Yes, we do have what you're looking for! For your Replacement Heavy-Duty Landing Gear Jack Leg for Ground Control 2.0 #LC241844, you can use the: -Replacement Aluminum Gearbox for Stromberg Carlson Landing Gear #LG-179015. If you are needing…

view full answer...

Answer 2

On the Lippert Ground Control 3.0 #LC358590 the error you are receiving indicates either a problem at the left front jack, a hall signal issue (open ground/short, or other malfunction) or an unexpected high amperage current stall (meaning the battery…

view full answer...

Answer 3

The Lippert 2.0 system is not compatible with the motors on the 3.0 system. The 3.0 system uses electric motors that utilize the hall effect where the 2.0 system does not. This is a completely different design which makes the motor and legs…

view full answer...

Answer 4

The Replacement Gearbox for etrailer and Ram 5th Wheel Landing Gear #RVLG-RDBOX that you referenced is designed to fit Ram and etrailer brand fifth wheel landing gear part #RVLG-8000. This is a really common set seen on trailers but the even more…

view full answer...

Answer 5

To determine the best landing gear option for your 1997 Forest River Sierra you'll need to measure the where your weld-stops sit to see if there is a matching set so that you can swap over without having to cut off the old mounting brackets and…

view full answer...

Answer 6

The correct replacement lead landing gear leg for a Ground Control 2.0 Leveling System is the Replacement Heavy Duty Driver Leg for Lippert Ground Control 2.0 Landing Gear part #LC241846 for standard (29-1/2" outer tuber body) or part #LC241845…

view full answer...

Answer 7

The Replacement Heavy-Duty Landing Gear Jack Leg for Ground Control 2.0 - Extended #LC241845 is a replacement for the Heavy-Duty Landing Gear Jack Leg for Ground Control 2.0 and will work on either side.

view full answer...

Answer 8

If you have the Lippert Ground Control 2.0 Electric Leveling System on the Crusader 5th Wheel then you'll need the Replacement Heavy-Duty Landing Gear Jack Leg for Ground Control 2.0 part #LC241846 for 29-1/2" outer tube or part #LC241845…

view full answer...

Answer 9

There unfortunately isn't a guide to tell us the weld stop spacing in your 2012 Genesis Supreme Vortex so you'll first want to measure so we can see if there's a compatible replacement without have to cut off your current mounting…

view full answer...

Answer 10

Mounting hardware does not come with the replacement gear box part #RVLG-RDBOX.

view full answer...

Answer 11

You'll need a new jack leg based on what you described. For a replacement you'd want the part #LC241845 for the driver side or part #LC241846 for the lead leg that is normally on the passenger side.

view full answer...

Answer 12

The gearbox #RVLG-RDBOX for the Landing Gear Set w/ Handle #RVLG-8HDL can be mounted in the horizontal or vertical position. I went out to the warehouse and tested both the gearbox and lead leg together and the pins that hold the gearbox in place…

view full answer...