Replacement A-Frame Jack for 2020 Grand Design Reflection 300RBTS

Question

Question:

I have a 2020 Grand Design Reflection 300RBTS and a 2022 Ram 2500 Diesel im using a Blueox weight distribution hitch system im looking for recommendation on a New tongue Jack with a higher Tongue weight capacity any recommendations. Respectful.

asked by: Eduardo R

0

Expert Reply:

For an A-Frame jack replacement on your 2020 Grand Design Reflection 300RBTS I recommend the Phoenix Electric Trailer Jack # UF38-944040. I'm not sure what your current jack capacity is but this has a lift capacity of 4,000 lbs, which is more than enough for your travel trailer. It has a 10-1/2" retracted bracket height and a 28-1/2" extended height with a total travel of 22-1/2". This also comes with a 10-year warranty if registered within 90 days that can't be beat.

expert reply by: Robin H

0

Answer 1

Your truck tailgate hitting the electric jack on your 2022 Keystone Springdale TT is a pretty common occurrence. Unfortunately, I am not able to determine what jack you have from your RV information. But, I have listed a couple potential options. I…

view full answer...

Answer 2

Trailer jacks do sometimes fail even when they are being used under their capacity so while it's a bummer that yours did I wouldn't say you did anything wrong and maybe just had some bad luck with yours. For a replacement I really like the…

view full answer...

Answer 3

The Ultra Fab jack cover part #UF38-944020 is the recommended cover for the Ultra-Fab jack part #UF38-944040. This will fit the jack perfectly.

view full answer...

Answer 4

For an electric a-frame jack I would recommend the Phoenix part #UF38-944040 as this has more than enough capacity and is the fastest electric jack out there that can go from all the way up to all the way down in a matter of seconds. To be exact:…

view full answer...

Answer 5

The wires of the Phoenix Electric Trailer Jack #UF38-944040 are 10 gauge and 81 inches long.

view full answer...

Answer 6

I do have some great full replacement options for you but the motors are not replaceable on trailer tongue jacks. There might be one or two out there which are but none of the dozens we carry ever have that option. Instead, I recommend the Phoenix…

view full answer...

Answer 7

Electric A-frame trailer jacks often have the same bolt pattern, yes. Just keep in mind that a higher-capacity jack doesn't necessarily mean more speed, it's all about the jack itself. For example, the 3,500 lb Ultra-Fab Electric A-Frame Jack…

view full answer...

Answer 8

Phoenix Electric Trailer Jack - A-Frame - 22-1/2" Lift - 4,000 lbs #UF38-944040 sounds like it needs a better ground connection. You can wire it directly to the battery like in the installed video or you can install the ground wired to the…

view full answer...

Answer 9

The electric jack I would recommend for your 2018 Jayco Jay Flight 242BHSW is the Phoenix Electric Jack part #UF38-944040 as this is the fastest electric jack out there. Travel speed (w/ 1,000-lb tongue weight): Extends 6" in 9.5 seconds…

view full answer...

Answer 10

Hi Tom, I have two options to replace the electric tongue jack on your Jayco Whitehawk: Option 1: Electric Jack w/ Footplate #EJ-3520-BBX. This jack is going to be your no-frills 'get the job done' style jack. It has a 3,500lb capacity and…

view full answer...

Answer 11

Hey Joe, yes the Lippert stabilizer jack part #LC298707 does fit your Grand Design Transcend 245RL but it is sold individually so if you wanted a set for the front and the rear you would need to order a quantity of two.

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...