How To Confirm Fit of Kenda 205/65-10 Bias Trailer Tire with 10" Galvanized Wheel AM3H490

Question

Question:

Will the tire/wheel combo fit torsion axles with elecric brakes?

asked by: Ben

0

Expert Reply:

The Kenda 205/65-10 Bias Trailer Tire with 10" Galvanized Wheel part # AM3H490 is designed for a trailer hub with 5 on 4-1/2" bolt pattern. Therefore, so long as your bolt pattern matches this and you have the needed space (20.4" diameter x 8.4" wide) it will be a fit.

It does not matter if the trailer has torsion or leaf spring axles nor does it matter if the trailer has electric brakes or not, so long as the above are true it will fit.

expert reply by: Conner L

0

Answer 1

To determine if your trailer would be compatible with the Kenda 205/65-10 Bias Trailer Tire with 10" Galvanized Wheel #AM3H490 you will need to compare the dimensions of this tire and wheel to your trailer to see if you have enough clearance.…

view full answer...

Answer 2

I recommend going with the Kenda 205/65-10 Bias Trailer Tire with the 10" Galvanized Wheel found as part #AM3H490 on our site. The tire is similarly sized with an 8.4" section width and a 20.4" outer diameter. It also has a load range…

view full answer...

Answer 3

The wheel and tire combo part #AM3H490 that you referenced weighs 31 lbs.

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 6

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

view full answer...

Answer 7

The 205/65-10 and the 20.5 x 8-10 would be very close in size. Assuming that 20.5 is the diameter of the tire and 8 is the width. The Kenda 205/65-10 Bias Trailer Tire with 10 inch White Wheel, #AM3H390, for example, is 8.3 inches wide with a…

view full answer...

Answer 8

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 9

The three most common lug stud sizes for a trailer are 1/2"-20, 9/16"-18, and 5/8"-18. In order to make sure you get the correct lug nuts you need to measure the lug studs on the trailer now as we have no way to look this up for…

view full answer...

Answer 10

The 12 inch tires that we carry are rated for 65 miles per hour. Any faster than that for extended periods and the excessive heat build up will cause tire failure. To get a tire with a higher speed rating you would have to go up in size. That also…

view full answer...

Answer 11

Good morning, Cliff. As of today (3/27/24) we are expecting the #KE33JR tire/wheel combo to be in stock in about 2 weeks. Hopefully this means we can take our own pictures and put them on the site within maybe about 3-4 weeks from now. What I can…

view full answer...

Answer 12

The modern size equivalent of the 20.5x8-10 that you have currently would be the same size tire that is on the #AM3H340 that you referenced, 205/65-10. As long as the bolt pattern of your current hubs are 4 on 4 inch the wheels of this would bolt up…

view full answer...

How To Confirm Fit of Kenda 205/65-10 Bias Trailer Tire with 10" Galvanized Wheel AM3H490

Product Page this Question was Asked From

Continue Researching