Recommended Tire and Wheel Combo to Replace a 20.5-8 x 10 Tire
Question:
I have a 20 ft pontoon with 40hp 4 stroke on a Shorlandr trailer. The hub is 5 x 4.5inch. The tire is 20.5-8 x 10. Another label says 95M and E11. Another label says X2BU. I want to replace the tire/wheel combo on each side. What should I ordr?
asked by: Jeff
Expert Reply:
I recommend going with the Kenda 205/65-10 Bias Trailer Tire with the 10" Galvanized Wheel found as part # AM3H490 on our site.
The tire is similarly sized with an 8.4" section width and a 20.4" outer diameter. It also has a load range of E (1,650 lbs at 90 psi) and a max speed rating of 65 mph.
The wheel has the same 5 on 4-1/2" bolt pattern which is the same as your current wheel so it will fit perfectly on your trailer. This wheel has a galvanized finish on it which provides superior protection from rust and corrosion and it meets DOT specifications.
I have attached a review video for you to check out as well.
Product Page this Question was Asked From
Kenda 205/65-10 Bias Trailer Tire with 10" Galvanized Wheel - 5 on 4-1/2 - Load Range E
- Trailer Tires and Wheels
- Tire with Wheel
- Bias Ply Tire
- Load Range E
- 205/65-10
- 10 Inch
- N - 87 mph
- 5 on 4-1/2 Inch
- Steel Wheels - Galvanized
- Boat Trailer Wheels
- Kenda
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Trailer Hitch
- Shop: Kenda 205/65-10 Bias Trailer Tire with 10" Galvanized Wheel - 5 on 4-1/2 - Load Range E
- Search Results: 205 x 8 10 tire and rim
- Q&A: Recommended Tire for a 20-Foot Pontoon Boat Trailer Traveling Down the Highway
- Q&A: What PSI Is Needed For Load Range E Tires On Trailer Carrying Pontoon Boat
- Q&A: Replacement Hubs for 1997 FLOE Pro 100 Plus Snowmobile Trailer
- Search Results: 205x8~10
- Search Results: spare tire carrier
- Shop: Trailer Wiring
- Shop: Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 60" Long - 2,000 lbs
- Shop: Trailer Spindle Nut 1"
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 5 on 4-1/2 - Galvanized
- Shop: Cotter Pin - 1/8" Thick x 1-3/4" Long
- Shop: Washer For 1" Spindle
- Shop: Lippert Spare Tire Winch with Offset Cable
- Q&A: Replacement 10 Inch Wheel and Tire for Pontoon Boat Trailer
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Video: Review of Kenda Trailer Tires and Wheels - Tire with Wheel - AM3H490
- Search Results: 7 way trailer plug
- Search Results: boat trailer fenders
- Shop: Brake Controller
- Search Results: e5115 spring
- Search Results: light box
- Q&A: What Does Kenda 205/65-10 Bias Trailer Tire with 10" Galvanized Wheel # AM3H490 Weigh
- Q&A: How To Confirm Fit of Kenda 205/65-10 Bias Trailer Tire with 10" Galvanized Wheel AM3H490
- Q&A: Would the Kenda 205/65-10 Tire with 10" Wheel # AM3H490 be a Good Upgrade for 5.70-8 Tires
- Article: Trailer Tire Sizing
- Video: CE Smith Boat Trailer Parts - Winch Stand - CE31013G Review
- Article: Most Popular Wheel Bearings
- Video: Kenda Tires and Wheels - Tire with Wheel - AM3H330 Review
on Trailer Tires and Wheels
