What Does Kenda 205/65-10 Bias Trailer Tire with 10" Galvanized Wheel # AM3H490 Weigh

Question

Question:

I am building a custom trailer and need to know how much the AM3H490 wheel and tire weighs?

asked by: Zak

1

Helpful Expert Reply:

The wheel and tire combo part # AM3H490 that you referenced weighs 31 lbs.

expert reply by: Jameson C

1

Answer 1

I recommend going with the Kenda 205/65-10 Bias Trailer Tire with the 10" Galvanized Wheel found as part #AM3H490 on our site. The tire is similarly sized with an 8.4" section width and a 20.4" outer diameter. It also has a…

view full answer...

Answer 2

The Kenda 205/65-10 Bias Trailer Tire with 10" Galvanized Wheel part #AM3H490 is designed for a trailer hub with 5 on 4-1/2" bolt pattern. Therefore, so long as your bolt pattern matches this and you have the needed space…

view full answer...

Answer 3

To determine if your trailer would be compatible with the Kenda 205/65-10 Bias Trailer Tire with 10" Galvanized Wheel #AM3H490 you will need to compare the dimensions of this tire and wheel to your trailer to see if you have enough clearance.…

view full answer...

Answer 4

The Kenda 205/65-10 Bias Trailer Tire with 10" Galvanized Wheel part #AM3H440 has a maximum speed rating of 65 mph. In order to obtain a higher speed rating you will need to upgrade to a substantially larger tire size like the Karrier…

view full answer...

Answer 5

We do not balance our wheel and tire combos like the Kenda 205/65-10 Bias Trailer Tire with 10" Galvanized Wheel #AM3H400 in general trailer wheels and tires are not balanced and even when they are done the weights typically fall off since…

view full answer...

Answer 6

Because we have received different speed ratings for this tire, I contacted the manufacturer. The tech department of the manufacturer of the Kenda Bias Trailer Tire with Wheel, Item #AM3H490, confirmed that the speed rating of this tire is 65 mph.…

view full answer...

Answer 7

Your tire size of 20.5x8.0-10 is equivalent to the modern size of 205/65-10. Which we have several options for. If you have a 4 lug wheel you would want the part #AM3H340 or if you have a 5 lug wheel you'd need the part #AM3H400.

view full answer...

Answer 8

The modern equivalent to a 20.5x8-10 is going to be a 205/65-10. The bolt pattern is either going to be 4 on 4 inch or 5 on 4-1/2 inch. So if it requires 4 bolts then you likely have a 4 on 4 pattern. If it is 5 bolts then it is likely 5 on 4-1/2. To…

view full answer...

Answer 9

The modern equivalent of a 20.5 x 8 - 10 tire is a 205/65-10 tire. These two tires are going to have the exact same diameter of 20.5" therefore, you can absolutely use the 20.5 x 8 - 10 tires you have now as a spare. For a 205/65-10 tire, I…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

The 205/65-10 and the 20.5 x 8-10 would be very close in size. Assuming that 20.5 is the diameter of the tire and 8 is the width. The Kenda 205/65-10 Bias Trailer Tire with 10 inch White Wheel, #AM3H390, for example, is 8.3 inches wide with a…

view full answer...

Answer 12

The modern size equivalent of the 20.5x8-10 that you have currently would be the same size tire that is on the #AM3H340 that you referenced, 205/65-10. As long as the bolt pattern of your current hubs are 4 on 4 inch the wheels of this would bolt up…

view full answer...

What Does Kenda 205/65-10 Bias Trailer Tire with 10" Galvanized Wheel # AM3H490 Weigh

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching