Front Mount Trailer Hitch Receiver For a 2004 Nissan Titan With Snow Plow Mounting Brackets

Question

Question:

2004 nissan titan I’m looking for a front hitch but I have a easy mount plow on my truck what hitch would fit

asked by: Gary

0

Expert Reply:

Currently the Curt Front Trailer Hitch Receiver # 31199 is the only custom fit front receiver we carry for your 2004 Nissan Titan. I have included the installation instructions linked below so you can see how it mounts on your Titan and if it uses the same mounting locations as your plow mount. To be able to verify if it will fit I would need to know the manufacturer, model and part number for your plow mount to see how it is attached.

If you notice your plow mount uses the same mounting holes you may still be able to have a fabrication shop create a front receiver for you using the 2" Weld-On Receiver # E17.

expert reply by: Bud M

0

Answer 1

Good question! The blade stiffeners that come with the Detail K2 Snowplow #K2AVAL8422 don't necessarily have to be used. I reached out to my contact at Detail K2 who said that the only time that those stiffeners really need to be used is if you…

view full answer...

Answer 2

The Curt front hitch part #31199 is a fit for your 2WD 2004 Nissan Titan. If you check out the install picture I attached you will see that it does not extend out past the front bumper of a vehicle it is installed on.

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

I am happy to verify for you that your 2023 Nissan Frontier Pro 4X is 100% compatible with the Draw-Tite front hitch that fits, which is the following part number: - Draw-Tite Front Mount Trailer Hitch Receiver #65075 So you will have no issues…

view full answer...

Answer 5

Yes, the Dexter Hub #K08-285-96 will fit on a Lippert axle #nv2422811. They are both rated for 8K and the bearings and grease seal match up between them. The axle is actually rated at 7K, but that is because it comes with 7K brakes. It is actually an…

view full answer...

Answer 6

I checked with our manufacturers, and for your 2001 Ford F-350, the only option for an under the bumper front mount hitch is indeed from Curt: - Curt Front Mount Trailer Hitch Receiver #C31014 Sorry to hear your other Curt products haven't been…

view full answer...

Answer 7

The carriage bolts that are included with the Curt Front Mount Trailer Hitch, part #31352 are 1/2 inch. There are three bolts used on each side of the trailer hitch, and are installed in existing holes in the frame of the vehicle.

view full answer...

Answer 8

Hey Richard, we do offer a replacement hardware kit for the Curt front hitch part #33328 that you have with the part #RHK. On the product page you'd need to enter the part number of this hitch and then select the manufacturer as Curt and we'd…

view full answer...

Answer 9

The Dexter Trailer Hub and Drum Assembly, part #8-174-5UC3, includes the lug nuts and rim clamps that hold the wheel on to the hub. The lug nuts are part #916N and have a 9/16-inch fine thread. The replacement stud that is installed in the hub…

view full answer...