Trailer Hitch Receiver and Vehicle Wiring Harness For a 2018 Toyota Camry

Question

Question:

I need to know if a curtis hitch off a 2019 sienna will fit a 2018 toyota camry.

asked by: Wilfred R

1

Helpful Expert Reply:

You will need a new Curt Trailer Hitch Receiver # C11576 for your 2018 Toyota Camry. The receiver hitch you have on your 2019 Toyota Sienna is much wider due to the wider chassis used.

If you will be using the receiver for towing a small trailer you will need a T-One Vehicle Wiring Harness # 118763 which will give you a 4-way flat connector for the trailer lighting. And a Ball Mount # C45521 with either a 1-7/8" # A-80, or 2" # A-82 hitch ball to match your coupler. Finally a Hitch Pin and Clip # F-4 can be used to hold the ball mount in the receiver or you can use a kit like the Master Lock # 3794DAT to secure your trailer to your Camry.

expert reply by: Bud M

1

Answer 1

We do have the Trailer Hitch Adapter #e93YR. This will fit into a 1-1/4" receiver and allow you to fit a 2" hitch accessory. It will give you a 5" rise and you will need to reduce your receiver's tongue weight capacity by 50% when…

view full answer...

Answer 2

I do have an option for you but the only trailer hitches for a 2018 Toyota Camry are class I, 1-1/4". I recommend the Curt Trailer Hitch Receiver part #C11576 which offers a bolt-on fit. The issue with this is that most mobility scooter carriers…

view full answer...

Answer 3

We have the Curt Class I, part #C11576 which is a confirmed fit for your 2018 Toyota Camry. It appears 2018 was a split model year for the Camry, but that makes no difference as far as hitch fits go. Both the XV70 and the XV50 use the same hitches.…

view full answer...

Answer 4

Hitch rattle isn't a super common issue but there are some easy ways to relieve the noise. The easiest solution is to bend the exhaust hanger up so that the muffler sets further above the hitch. If bending the hanger does not provide a solution,…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for your…

view full answer...

Answer 7

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 8

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 9

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 10

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 11

A TCM double-lip grease seal number 127194 has an inner diameter of 1.274-inches and an outer diameter of 1.983-inches according to my research. The available grease seal nearest to those dimensions that we offer is part #RG06-010, which is a…

view full answer...

Answer 12

The part you referenced 127194TB is a double-lip seal with an inner diameter of 1.274-inches and an outer diameter of 1.983-inches. The available seal nearest to those dimensions that we offer is part #RG06-010, which is a double-lip seal sold as a…

view full answer...

Trailer Hitch Receiver and Vehicle Wiring Harness For a 2018 Toyota Camry

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching