Recommended Suspension Enhancement and Steering Stabilization for 2021 Winnebago Intent 29 L

Question

Question:

I own a 2021 Winnebago Intent 29 L. What work you suggest I purchase to help with suspension the bumps rattle my teeth and steering stability. Thank you

asked by: Carol A

0

Expert Reply:

To reduce the bumps and smooth out the ride on your 2021 Winnebago Intent 29L on a Ford F-53 chassis I recommend adding SumoSprings. You will need the # SSF-173-40-2 for the front and # SSR-187-54-1 for the rear. These will absorb the bumps and road shock while also helping to minimize sway. They have a bolt-on installation and come with a lifetime warranty.

For steering stabilization you need the Roadmaster Reflex Steering Stabilizer with Mounting Brackets # RM62VR. This will keep you centered and help you maintain control of your motorhome. The steel spring pushes/pulls you back to the neutral position to compensate for oversteering and help reduce road fatigue. The steering stabilizer combined with the SumoSprings will result in a much improved driving experience and save your teeth.

I have attached some installation and review videos for your reference.

expert reply by: Robin H

0

Answer 1

The converter output of the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger part #PD4060K should be between 12.6 and 13.6 VDC depending on if a load is present. If you're seeing more than this then it would indeed…

view full answer...

Answer 2

There are 2 sets of instructions for the Roadmaster Exact Center Steering Stabilizer w/ Custom Brackets #RM82RR. One for the steering stabilizer and one for the custom brackets. The instructions for the stabilizer is just a page with some…

view full answer...

Answer 3

I recommend using the Roadmaster Exact Center Steering Stabilizer w/ Custom Brackets #RM82RR on your 2022 Newmar Bay Star 3226. This custom mounting bracket is specific Ford F-53 V8 22,000LB GVWR chassis. The Exact Center included is their heavier…

view full answer...

Answer 4

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the…

view full answer...

Answer 5

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 6

We do have the Rhino-Rack Masterkey Lock Barrels #RRRK093-2 which will provide you with 2 new lock cores and keys for your Rhino-Rack Zenith MasterFit Rooftop Cargo Box #RRRMFZ66. As far as pricing goes on the different sets they can change based on…

view full answer...

Answer 7

The best option we offer for your dump trailer is the Erickson Mesh Tarp and Truck Bed Cover part #EM57059 which measures 12' wide x 16' long. It's not the exact dimensions you wanted but it will still cover most of the area you need it…

view full answer...

Answer 8

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 9

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Answer 10

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 11

The torque spec for the rear U bolts on your 2019 F53 motorhome are dependent on the size. If you have 3/4 x 16 u bolts (and used a 1 1/8" socket to remove the nuts) then they torque to 250 lb-ft. If the u bolts are 7/8 x 14 (and you used a 1…

view full answer...

Answer 12

Generally speaking, the lube plate will need to cover the skid plate on the 5th wheel hitch. There are some pin boxes out there that will recommend a specific lube plate but most of the times this classification will be from the 5th wheel hitch…

view full answer...