SuperSprings SumoSprings Rebel Front Helper Springs Installation - 2020 Ford F-53 Video

For your 2021 Ford F-53 Chassis motorhome with a 24000lb GVWR I recommend the Sumo Springs Rebel Custom Helper Springs #SSF-173-40-2 for the front which have a 3000lb load leveling capacity. For the rear you will need the Sumo Springs #SSR-183-54-1…

We have both front and rear options for SumoSprings for your 26,000 lbs Thor Outlaw. For the rear you will want the SumoSprings Maxim Custom Helper Springs item #SSR-187-54-1. These are custom fit and rated for your F-53 chassis. They have a 7,000…

For your 18k 2016 Jayco Alante 26AY the correct SumoSpring kit is the part #SSF-170-40-2 for the front axle. This kit is designed for GVWRs of between 16k and 22k which will work perfectly for you. Recently SumoSprings changed quite a few of their…

The SumoSprings Maxim Custom Helper Springs #SSF-170-40-2 are a confirmed fit on your 2016 Thor ACE, as long it's 2-wheel drive. These springs install with both a top and bottom bracket in place of your factory bumpstops. They don't require…

The correct SumoSprings Rebel Custom Helper Springs for the front of a 2016 Tiffin Allegro 34PA Motorhome is part #SSF-173-40-2. I highly recommend the SumoSprings instead of Timbrens as they have a much smoother ride and are the more preferred…

The SumoSprings Rebel Custom Helper Springs - 2 Piece - Front Axle #SSF-170-40-2 are a confirmed fit and the two piece design does allow for the full suspension travel to allow your vehicle suspension to work to it's best capacity without…

I spoke to my contact at Timbren and she emailed me a picture of a Timbren #TFRF53A with handwritten dimensions drawn on the picture. See attached picture. I attached installation instructions for this product for you to check out.

I pulled one of each of the Ultra-Fab skid wheel kits you referenced, parts #UF48-979017 and #UF48-979018, so that I could take the measurements of their mounting u-bolts. Skid wheel kit #UF48-979017 fits 2-1/2 x 2-1/2-inch square hitch tubing. Its…

Let me see what I can figure out for you, I have the solution linked below: **SumoSprings Rebel Custom Helper Springs - 2 Piece - Front Axle #SSF-173-40-2. There was a generation change in the F-53 chassis, Ford changed the motor to the 7.3L V8. When…

The Westin MAX Bull Bar w/ Winch Mount you referenced, part #46-43635-23635 will indeed fit the factory bumper on your 2012 Wrangler Unlimited. I have provided a photo of the installed Bull Bar that Westin shows on the install sheet. To install the…

The torque spec for the rear U bolts on your 2019 F53 motorhome are dependent on the size. If you have 3/4 x 16 u bolts (and used a 1 1/8" socket to remove the nuts) then they torque to 250 lb-ft. If the u bolts are 7/8 x 14 (and you used a 1…

Hey MIchael, some play like that is normal with the Gen-Y ball part #GY43XR so I wouldn't worry too much about it.