Trailer Hitch for 2008 Pontiac Grand Prix for Scooter Carrier

Question

Question:

2008 Pontiac Grand Prix Which hitch do I need for an electric handicap scooter and electric carrier? Thank you

asked by: Jim L

0

Expert Reply:

The highest capacity hitch we have for your 2008 Pontiac Grand Prix is going to be the Curt part # C12225 which has a tongue weight rating of 350 lbs. You would need to make sure the weight of your carrier and scooter weighs less than that together.

expert reply by: Jameson C

0

Answer 1

Both the RidgeBack #Y02459 and FullTilt #Y02463 are high-end hanging-style racks from Yakima but in this case the FullTilt has a few extra features so I recommend going that route. Both racks have very similar features as far as tilting/folding ease…

view full answer...

Answer 2

The Curt Trailer Hitch, #C12225, has a tongue weight capacity of 350 pounds and a gross trailer weight capacity of 3,5000 pounds. This is a Class I hitch with a 1-1/4 inch receiver opening. I have included a link to the instructions for this hitch…

view full answer...

Answer 3

We had the opportunity to test fit hitches on the Pontiac Grand Prix and found that the Curt Hitch #C12225 has just 7 1/2 inches of clearance from the bottom of the receiver to the ground. The Curt Hitch #C12225 has a nice powder coat finish that…

view full answer...

Answer 4

For your 2003 Pontiac Grand Prix, there are two Class II hitches available. We have the Draw-Tite Trailer Hitch, #36241 and the Curt Trailer Hitch #C12225. They both are class II, have a tongue weight capacity of 350 pounds, have a towing capacity of…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 8

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 9

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Answer 10

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 11

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 12

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

view full answer...