Should There be Separate Ground Wire on Curt T-Connector Wiring Harness for 2020 Infiniti QX60
Question:
For the CURT 55441 the ground wire white is installed directly into the connector, instead of hanging like I have seen other harnesses so that it can be attached to the vehicle frame. Should i leave it as it is, or do I need to remove it from the harness and attach it to the frame.
asked by: Will
Expert Reply:
The correct Curt T-Connector Vehicle Wiring Harness for a 2020 Infiniti QX60 is part # C56281. In regards to the installation of the trailer connector harness, this will require an additional ground so you'll either need to find a factory ground stud to tie into or make one of your own with a self tapping screw. This extra ground is needed as the factory ground is determined to be too weak for the aftermarket harness by the manufacturer.
I don't recommend using the Replacement Wiring Harness for Curt T-Connector part # C55441 since it does not contain the relay harness you need and it lacks the extra ground (old design) which is now required by the wiring harness manufacturer for this vehicle.
Unfortunately, I can't recommend you modify a harness.
Products Referenced in This Question
Replacement Wiring Harness for Curt T-Connector Nissan Vehicle Wiring Harness with 4-Way Plug
- Accessories and Parts
- Custom Fit Vehicle Wiring
- Wiring Harness
- CURT
more information >
Product Page this Question was Asked From
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- No Converter
- Custom Fit
- 4 Flat
- CURT
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Video: Curt Custom Fit Vehicle Wiring - Trailer Hitch Wiring - C56281 Review
- Video: Curt T-Connector Vehicle Wiring Harness Installation - 2019 Infiniti QX60
- Video: Curt T-Connector Vehicle Wiring Harness Installation - 2018 Infiniti QX60
- Shop: Curt 4-Way Flat Trailer Connector with Circuit Protected Powered Tail Light Converter
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Video: Choosing the Right Trailer Wiring
- Shop: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Search Results: trailer hitch
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Search Results: hitch
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Search Results: trailer hitch wiring
- Shop: Brake Controller
- Q&A: Recommended Hitch for a 2024 Toyota Grand Highlander
- Article: Trailer Wiring Diagrams
- Shop: 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End
- Video: Choosing the Right Brake Controller
- Article: My Trailer Hitch Doesn't Fit
- Search Results: trailer brake controller
- Q&A: What Is An OEM Prep Package And How Do I Know If I Have It
- Shop: etrailer Hitch Pin Alignment Collar for Hitch Accessories - 2" Hitches
- Shop: Suspension Enhancement
- Video: Curt 4-Pole Flat Trailer Connector Mounting Bracket Review
- Article: How to Measure for Trailer Hitch Drop
on Custom Fit Vehicle Wiring
