Determining Replacement Bearing Kits For a Magic Tilt TML 2244 Trailer With 2,200LB Axles
Question:
Im looking for bearings and seals for Magic Tilt, Model TML2244. Gross 5075, tandem axel trailer. Can you match the bearings and seals I need by the trailer and model?
asked by: Jim c
Expert Reply:
Your Magic Tilt TML2244 trailer will use tandem 2,200lb axles. The most popular sizes used on that size axle is the Bearing Kit # BK1-150. The only ways to verify exactly what size bearings and grease seals your axle uses is by either finding the axle serial number or pulling apart one of your hubs. Depending on the age of your axles the serial number may have worn off the axles and then you will have to pull apart the hub to find the parts. Some of the parts may be stamped with the part numbers otherwise you will have to measure everything with a Digital Caliper # PTW80157 to find the measurements(see image). Below is a list of the parts included with the kit and their measurements.
Inner/Outer Bearing # L44649 (1.063" ID)
Inner/Outer Race # L44610 (1.98" OD)
Grease Seal # 10-9 (1.987" OD, 1.500" ID)
(click to enlarge)
Products Referenced in This Question
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.500 Inch I.D.
- 1.987 Inch O.D
- TruRyde
more information >
Replacement Race for L44643 and L44649 Bearings
- Trailer Bearings Races Seals Caps
- Races
- Standard Races
- 1.980 Inch O.D.
- Bearing L44643
- Bearing L44649
- Race L44610
- 2000 lbs Axle
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
4" Carbon Fiber Digital Caliper
- Hand Tools
- Measuring and Layout Tools
- Digital Calipers
- Carbon Fiber
- Performance Tool
more information >
Product Page this Question was Asked From
Bearing Kit, L44649 Inner/Outer Bearings, 10-9 Seal
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649
- Race L44610
- 2200 lbs Axle
- etrailer
more information >
Continue Researching
- Shop: Bearing Kit, LM67048/25580 Bearings, 10-36 Seal
- Shop: Bearing Kit, L44649 Inner/Outer Bearings, 10-9 Seal
- Shop: Submersible, Under 80" Trailer Light Kit with 25' Wiring Harness
- Q&A: Removing Trailer Bearing that is Stuck on Spindle After Removing Hub
- Q&A: Proper Way to Tighten Trailer Spindle of Castle Nut
- Q&A: Torque Settings For Wheel Lug Nuts For Boat Trailer And utility Trailer
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Q&A: How is a 5 on 4-1/2 Trailer Wheel Bolt Pattern Measured
- Q&A: How to Identify Trailer Axles
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2
- Shop: Grease Seal
- Shop: Double Lip Seal for 3,700-lb Marine Hubs
- Video: Dexter Trailer Hub and Drum Assembly Installation 8-247-50
- Video: TryRyde Tang Type Replacement Spindle Washer Review
- Q&A: Bearing Kit for Dexter Axle with 2,200 lb Capacity
- Q&A: Locating Replacement Bearing Kit for 2003 Jayco Qwest Camper
- Search Results: 44649
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Article: Trailer Tire Sizing
- Search Results: 68149
- Shop: Trailer Wiring
- Search Results: 25580
- Shop: Fifth Wheel Hitch
- Article: Most Popular Wheel Bearings
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Video: Titan Trailer Brakes T2385200 Review
- Search Results: dust cap
- Shop: Brake Controller
on Trailer Bearings Races Seals Caps
